ADM00419 Microchip Technology, ADM00419 Datasheet - Page 17

• Manufacturer Part Number: ADM00419
• Description: Power Management IC Development Tools MCP2210 Breakout Module
• Manufacturer: Microchip Technology
• Type: Other Power Managementr

Specifications of ADM00419

• Rohs: yes
• Product: Evaluation Kits
• Tool Is For Evaluation Of: MCP2210
• Input Voltage: 3.3 V, 5 V

2.4
© 2012 Microchip Technology Inc.
MCP2210 TYPICAL USAGE SCENARIOS
2.3.8
The MCP3201 12-bit ADC section displays the board’s measured V
voltage between 0 and V
motherboard potentiometer.
FIGURE 2-6:
The remaining channels (channels 2 and 3) can also display custom user
measurements of voltages between 0V
The MCP2210 can be used in systems where an SPI bus is available. The MCP2210
device can be either the single master on the bus, or one of the masters sharing the
bus, if a proper master-access arbitration scheme is in place.
In cases where the MCP2210 is the only master on the SPI bus, a typical usage
scenario is shown in Figure 2-7. The SPI bus links the SPI slave chips to the system,
while a few GPs (configured for chip select function) can be used as chip select lines.
If SPI slave interrupt monitoring is required, the GP6 needs to be configured for its
dedicated function, in order to monitor the interrupts coming from the SPI slave chips.
The PC application will handle all the details necessary for data transfer between the
MCP2210 and the SPI slave devices.
Motherboard
potentiometer
settings display
(between 0 and
and V
Custom voltage
value display
DD
MCP3204 ADC Display Section
/2)
MCP3204 ADC VALUES DISPLAY
DD
/2, corresponding to the voltage value set by the
Installation and Operation
–
2.5V (maximum).
V
value display
DD
DD
DS52057A-page 17
voltage
voltage and a