NAND01GW3B2CN6E NUMONYX, NAND01GW3B2CN6E Datasheet - Page 32

• Manufacturer Part Number: NAND01GW3B2CN6E
• Description: IC FLASH 1GBIT 48TSOP
• Manufacturer: NUMONYX

Specifications of NAND01GW3B2CN6E

• Format - Memory: FLASH
• Memory Type: FLASH - Nand
• Memory Size: 1G (128M x 8)
• Interface: Parallel
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TSOP
• Cell Type: NAND
• Density: 1Gb
• Access Time (max): 25us
• Interface Type: Parallel
• Boot Type: Not Required
• Address Bus: 8b
• Operating Supply Voltage (typ): 3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Program/erase Volt (typ): 2.7 to 3.6V
• Sync/async: Asynchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8b
• Number Of Words: 128M
• Supply Current: 30mA
• Mounting: Surface Mount
• Pin Count: 48
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Speed: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Compliant

Device operations
6.8.4
6.8.5
6.8.6
Table 13.
1. Only valid for cache program operations, for other operations it is same as SR6.
2. Only valid for cache operations, for other operations it is don’t care.
32/61
SR4, SR3, SR2
SR7
SR6
SR5
SR1
SR0
Bit
Cache program error bit (SR1)
The cache program error bit can be used to identify if the previous page (page N-1) has been
successfully programmed or not in a cache program operation. SR1 is set to ’1’ when the
cache program operation has failed to program the previous page (page N-1) correctly. If
SR1 is set to ‘0’ the operation has completed successfully.
The cache program error bit is only valid during cache program operations, during other
operations it is don’t care.
Error bit (SR0)
The error bit is used to identify if any errors have been detected by the P/E/R controller. The
error bit is set to ’1’ when a program or erase operation has failed to write the correct data to
the memory. If the error bit is set to ‘0’ the operation has completed successfully. The error
bit SR0, in a cache program operation, indicates a failure on page N.
SR4, SR3 and SR2 are reserved
Status register bits
Cache program error
Program/ erase/ read
Program/ erase/ read
Cache program error
Cache ready/busy
Write protection
Generic error
controller
Reserved
controller
Name
(1)
(2)
Logic level
Don’t care
‘1’
‘0’
‘1’
‘0’
'1'
'0'
'1'
'0'
'1'
'0'
'1'
'0'
'1'
'0'
Not protected
Protected
P/E/R C inactive, device ready
P/E/R C active, device busy
Cache register ready (cache operation only)
Cache register busy (cache operation only)
P/E/R C inactive, device ready
P/E/R C active, device busy
Page N-1 failed in cache program operation
Page N-1 programmed successfully
Error – operation failed
No error – operation successful
Page N failed in cache program operation
Page N programmed successfully
NAND01G-B2B, NAND02G-B2C
Definition