AT45DB081D-MU-2.5 Atmel, AT45DB081D-MU-2.5 Datasheet - Page 12
![IC FLASH 8MBIT 50MHZ 8VDFN](/photos/7/26/72647/8-vfqfn-8m1-a_sml.jpg)
AT45DB081D-MU-2.5
Manufacturer Part Number
AT45DB081D-MU-2.5
Description
IC FLASH 8MBIT 50MHZ 8VDFN
Manufacturer
Atmel
Datasheet
1.AT45DB081D-MU.pdf
(53 pages)
Specifications of AT45DB081D-MU-2.5
Format - Memory
FLASH
Memory Type
DataFLASH
Memory Size
8M (4096 pages x 264 bytes)
Speed
50MHz
Interface
SPI, RapidS
Voltage - Supply
2.5 V ~ 3.6 V
Operating Temperature
-40°C ~ 85°C
Package / Case
8-VFQFN, 8-VFQFPN
Architecture
Sectored
Interface Type
SPI
Supply Voltage (max)
3.6 V
Supply Voltage (min)
2.5 V
Maximum Operating Current
15 mA
Mounting Style
SMD/SMT
Organization
64 KB x 16
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
8.1
8.1.1
8.1.2
8.1.3
12
Software Sector Protection
Atmel AT45DB081D
Enable Sector Protection Command
Disable Sector Protection Command
Various Aspects About Software Controlled Protection
Sectors specified for protection in the Sector Protection Register can be protected from program
and erase operations by issuing the Enable Sector Protection command. To enable the sector
protection using the software controlled method, the CS pin must first be asserted as it would be
with any other command. Once the CS pin has been asserted, the appropriate 4-byte command
sequence must be clocked in via the input pin (SI). After the last bit of the command sequence
has been clocked in, the CS pin must be deasserted after which the sector protection will be
enabled.
Table 8-1.
Figure 8-1.
To disable the sector protection using the software controlled method, the CS pin must first be
asserted as it would be with any other command. Once the CS pin has been asserted, the
appropriate 4-byte sequence for the Disable Sector Protection command must be clocked in via
the input pin (SI). After the last bit of the command sequence has been clocked in, the CS pin
must be deasserted after which the sector protection will be disabled. The WP pin must be in the
deasserted state; otherwise, the Disable Sector Protection command will be ignored.
Table 8-2.
Figure 8-2.
Software controlled protection is useful in applications in which the WP pin is not or cannot be
controlled by a host processor. In such instances, the WP pin may be left floating (the WP pin is
internally pulled high) and sector protection can be controlled using the Enable Sector Protection
and Disable Sector Protection commands.
Command
Enable Sector Protection
Command
Disable Sector Protection
Enable Sector Protection Command
Enable Sector Protection
Disenable Sector Protection Command
Disable Sector Protection
CS
CS
SI
SI
Each transition
represents 8 bits
Each transition
represents 8 bits
Opcode
Opcode
Byte 1
Byte 1
Byte 1
Byte 1
Opcode
Opcode
Byte 2
Byte 2
3DH
3DH
Opcode
Opcode
Byte 3
Byte 3
Byte 2
Byte 2
2AH
2AH
Opcode
Opcode
Byte 4
Byte 4
Byte 3
Byte 3
7FH
7FH
3596M–DFLASH–5/10
Byte 4
Byte 4
A9H
9AH