E-L9935013TR STMicroelectronics, E-L9935013TR Datasheet - Page 20

• Manufacturer Part Number: E-L9935013TR
• Description: IC STEPPER MOTOR DVR 2PH 20PWRSO
• Manufacturer: STMicroelectronics
• Type: 2 Phase Stepper Motor Driverr

Specifications of E-L9935013TR

• Applications: Stepper Motor Driver, 2 Phase
• Number Of Outputs: 1
• Current - Output: ±1.2A
• Voltage - Supply: 8 V ~ 24 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: PowerSO-20 Exposed Bottom Pad
• Product: Stepper Motor Controllers / Drivers
• Operating Supply Voltage: 14.4 V
• Supply Current: 4.5 mA
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Load: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-10346-2; E-L9935013TR

Functional description
5.13.1
20/29
Startup of the serial data interface
Falling slope of EN activates the device. After ten.sck the device is ready to work.
Falling slope of CSN indicates start of frame. Data transfer (reading SDI into the register)
takes place at the rising slopes of SCK.
Data transfer of the register to SDO takes place at the falling slope of SCK.
Rising slope of CSN indicates end of frame. At the end of frame data will only be accepted if
modulo 8 bit (modulo 8 falling slopes to SCK) have been transferred. If this is not the case
the input will be ignored and the bridges will maintain the same status as before.
SDO is a tristate output.
SDO is active while CSN = LOW, while CSN = HIGH SDO is high resistive.
Figure 9.
SPI data/clock timing
Doc ID 5198 Rev 9
L9935