IR3080MTRPBF International Rectifier, IR3080MTRPBF Datasheet - Page 18

• Manufacturer Part Number: IR3080MTRPBF
• Description: IC CONTROLLER PHASE 32LMLPQ
• Manufacturer: International Rectifier
• Series: XPhase™r

Specifications of IR3080MTRPBF

• Applications: Processor
• Current - Supply: 11mA
• Voltage - Supply: 9.5 V ~ 14 V
• Operating Temperature: 0°C ~ 100°C
• Mounting Type: Surface Mount
• Package / Case: 32-MLPQ
• Ic Function: Control IC With VCCVID And Overtemp Detect
• Supply Voltage Range: 9.5V To 14V
• Operating Temperature Range: 0°C To +100°C
• Digital Ic Case Style: MLPQ
• No. Of Pins: 32
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Controller Type: PWM
• Package: 32-Lead MLPQ
• Circuit: X-Phase Control IC
• Switch Freq (khz): 150kHz to 1.0MHz
• Pbf: PbF Option Available
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: IR3080MPBFTR; IR3080MTRPBF; IR3080MTRPBFTR

IR3080PbF
VID = 11111X Fault
VID codes of 111111 and 111110 will set the fault latch and disable the error amplifier. An 800ns delay is provided
to prevent a fault condition from occurring during Dynamic VID changes.
Power Good Output
The PWRGD pin is an open-collector output and should be pulled up to a voltage source through a resistor. During
soft start, the PWRGD remains low until the output voltage is in regulation and SS/DEL is above 3.91V. The
PWRGD pin becomes low if the fault latch is set. A high level at the PWRGD pin indicates that the converter is in
operation and has no fault, but does not ensure the output voltage is within the specification. Output voltage
regulation within the design limits can logically be assured however, assuming no component failure in the system.
Load Current Indicator Output
The VDRP pin voltage represents the average current of the converter plus the DAC voltage. The load current can
be retrieved by a differential amplifier which subtracts the VDAC voltage from the VDRP voltage.
System Reference Voltage (VBIAS)
The IR3081 supplies a 6.8V/5mA precision reference voltage from the VBIAS pin. The oscillator ramp amplitude
tracks the VBIAS voltage, which should be used to program the Phase IC trip points to minimize phase delay errors.
Thermal Monitoring (VRHOT)
The IR3080 senses its own die temperature and produces a voltage at the input of the VRHOT comparator that is
proportional to temperature. An external resistor divider connected from VBIAS to the HOTSET pin and ground can
be used to program the thermal trip point of the VRHOT comparator. The VRHOT pin is an open-collector output
and should be pulled up to a voltage source through a resistor. If the thermal trip point is reached the VRHOT
output drives low. Pulling HOTSET above approximately 7.5V will disable the oscillator (used during factory testing).
Page 18