L5987TR STMicroelectronics, L5987TR Datasheet - Page 14

• Manufacturer Part Number: L5987TR
• Description: IC REG SW 3A STEPDOWN 8-VFQFPN
• Manufacturer: STMicroelectronics
• Type: Step-Down (Buck)r

Specifications of L5987TR

• Internal Switch(s): Yes
• Synchronous Rectifier: No
• Number Of Outputs: 1
• Voltage - Output: 0.6 ~ 18 V
• Current - Output: 3A
• Frequency - Switching: 250kHz
• Voltage - Input: 2.9 ~ 18 V
• Operating Temperature: -40°C ~ 150°C
• Mounting Type: Surface Mount
• Package / Case: 8-VFQFN, 8-VFQFPN
• Power - Output: 1.5W
• Output Voltage: 0.6 V
• Output Current: 3 A
• Output Power: 1.5 W
• Input Voltage: 2.9 V to 18 V
• Switching Frequency: 250 KHz
• Mounting Style: SMD/SMT
• Duty Cycle (max): 100 %
• For Use With: 497-8369 - BOARD EVALUATION FOR L5987
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8494-2

Functional description
5.5
5.6
14/41
Figure 8.
Inhibit function
The inhibit feature allows to put in stand-by mode the device.With INH pin higher than 1.9 V
the device is disabled and the power consumption is reduced to less than 30 μA. With INH
pin lower than 0.6 V, the device is enabled. If the INH pin is left floating, an internal pull up
ensures that the voltage at the pin reaches the inhibit threshold and the device is disabled.
The pin is also VCC compatible.
Hysteretic thermal shutdown
The thermal shutdown block generates a signal that turns off the power stage if the junction
temperature goes above 150 °C. Once the junction temperature goes back to about 130 °C,
the device restarts in normal operation. The sensing element is very close to the PDMOS
area, so ensuring an accurate and fast temperature detection.
Over-current protection strategy
Doc ID 14972 Rev 3
L5987