S-8335A160FT-TB-G Seiko Instruments, S-8335A160FT-TB-G Datasheet - Page 31

• Manufacturer Part Number: S-8335A160FT-TB-G
• Description: IC REG SW 3CH STEP UP 24-TSSOP
• Manufacturer: Seiko Instruments
• Type: Step-Up (Boost), Invertingr

Specifications of S-8335A160FT-TB-G

• Internal Switch(s): Yes
• Synchronous Rectifier: No
• Number Of Outputs: 1
• Voltage - Output: 7.48 ~ 13.93 V, -5.44 ~ -10.13 V
• Frequency - Switching: 100kHz
• Voltage - Input: 2.4 ~ 5 V
• Operating Temperature: -20°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 24-TSSOP
• Power - Output: 650mW
• Output Voltage: 13.93 V
• Operating Temperature Range: - 20 C to + 70 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Rev.6.0
• When switching the output voltage by the electric volume, the soft start does not function. Note that an
• When the internal impedance of the power supply (VBAT) is large, the S-8335 Series may not start up.
• Make sure that the potential of the VOUT1 pin does not exceed 20 V, which is the absolute maximum
• Make the capacitance of VDIN, VCLK, and VSTR_B large enough to prevent noise and malfunctions.
• Seiko Instruments Inc. shall bear no responsibility for any patent infringement by a product that includes
overshoot will occur when the output voltage increases by a large amount.
Make sure that the internal impedance of the power supply used is sufficiently small when using this IC.
rating, when using this IC.
an IC manufactured by Seiko Instruments Inc. in relation to the method of using this IC in that product,
the product specifications, or the destination country.
_01
STEP-UP, FOR LCD BIAS SUPPLY, 3-CHANNEL SWITCHING REGULATOR
Seiko Instruments Inc.
S-8335 Series
31