PC367N2 Sharp Microelectronics, PC367N2 Datasheet - Page 9

• Manufacturer Part Number: PC367N2
• Description: PHOTOCOUPLER 1CH LOW IF 4-SMD
• Manufacturer: Sharp Microelectronics

Specifications of PC367N2

• Number Of Channels: 1
• Input Type: DC
• Voltage - Isolation: 3750Vrms
• Current Transfer Ratio (min): 100% @ 500µA
• Current Transfer Ratio (max): 500% @ 500µA
• Voltage - Output: 80V
• Current - Output / Channel: 50mA
• Current - Dc Forward (if): 10mA
• Vce Saturation (max): 200mV
• Output Type: Transistor
• Mounting Type: Surface Mount
• Package / Case: 4-SMD
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 425-1340-2

■ Design Considerations
● Degradation
● Recommended Foot Print (reference)
● Design guide
✩ For additional design assistance, please review our corresponding Optoelectronic Application Notes.
While operating at I
Please make design considering this fact.
In case that some sudden big noise caused by voltage variation is provided between primary and secondary
terminals of photocoupler some current caused by it is fioating capacitance may be generated and result in
false operation since current may go through IRED or current may change.
If the photocoupler may be used under the circumstances where noise will be generated we recommend to
use the bypass capacitors at the both ends of IRED.
This product is not designed against irradiation and incorporates non-coherent IRED.
In general, the emission of the IRED used in photocouplers will degrade over time.
In the case of long term operation, please take the general IRED degradation (50% degradation over 5years)
into the design consideration.
F
<0.5mA, CTR variation may increase.
1.5
9
6.3
PC367N Series
Sheet No.: D2-A00501EN
(Unit : mm)