LQ150X1LGB1 Sharp Microelectronics, LQ150X1LGB1 Datasheet - Page 26
![LCD TFT 15.0" 1024X768 XGA](/photos/7/91/79190/lq150x1lgb1_sml.jpg)
LQ150X1LGB1
Manufacturer Part Number
LQ150X1LGB1
Description
LCD TFT 15.0" 1024X768 XGA
Manufacturer
Sharp Microelectronics
Datasheet
1.LQ150X1LGB1.pdf
(27 pages)
Specifications of LQ150X1LGB1
Display Type
LCD - Color
Display Mode
*
Viewing Area
304.10mm L x 228.10mm W
Dot Pixels
1024 x 768 (XGA)
Pixel Density
1024 x 768
Module Size (w X H X T)
331.6 mm x 254.76 mm x 12.5 mm
Backlighting
White Normally White
Diagonal
15 in
Maximum Operating Temperature
+ 60 C
Minimum Operating Temperature
0 C
Operating Temperature Range
0 C to + 60 C
Product
Displays
Touch Panel
No Touch Panel
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Interface
-
Backlight
-
Dot Size
-
Dot Pitch
-
Lead Free Status / Rohs Status
Details
Other names
425-2475
This publication is the proprietary of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of
this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical for any purpose, in
whole or in part, without the express written permission of SHARP Express written permission is also required before any use of
this publication may be made by a third party.
The application circuit examples in this publication are provided to explain the representative applications of SHARP’s devices
and are not intended to guarantee any circuit design or permit any industrial property right or other rights to be executed. SHARP
takes no responsibility for any problems related to any industrial property right or a third party resulting from the use of
SHARP’s devices, except for those resulting directly from device manufacturing processes.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in
equipment using any of SHARP’s devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest
device specification sheets before using any SHARP’s device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structures and other contents
described herein at any time without notice in order to improve design or reliability. Contact SHARP in order to obtain the latest
specification sheets before using any SHARP’s device. Manufacturing locations are also subject to change without notice.
Observe the following points when using any device in this publication. SHARP takes no responsibility for damage caused by
improper use of the devices.
The appropriate design measures should be taken to ensure reliability and safety when SHARP’s devices are used for equipment
such as:
SHARP’s devices shall not be used for equipment that requires extremely high level of reliability, such as:
Contact a SHARP representative, in advance, when intending to use SHARP’s devices for any “specific” applications other than
those recommended by SHARP.
Contact and consult with a SHARP representative if there are any questions about the contents of this publication.
• Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
• Traffic signals
• Alarm equipment
• Military and space applications
• Medical equipment for life support
• Various safety devices etc.
• Nuclear power control equipment
• Gas leakage sensor breakers
NOTICE
LCP-00000-1