M0240SD-402MDAR1-3 Newhaven Display, M0240SD-402MDAR1-3 Datasheet - Page 12

• Manufacturer Part Number: M0240SD-402MDAR1-3
• Description: MODULE VF CHAR 2X40 5.34MM
• Manufacturer: Newhaven Display

Specifications of M0240SD-402MDAR1-3

• Outline L X W X H: 182.00mm x 33.50mm x 17.60mm
• Viewing Area: 134.75mm L x 11.50mm W
• Display Format: 40 x 2
• Display Type: Character
• Format: 5 x 8 Dots
• Voltage - Supply: 4.5 V ~ 5.5 V
• Character Size: 5.34mm H x 2.10mm W
• Interface: Parallel
• Operating Temperature: -20°C ~ 70°C
• Product: Character Display Modules
• Character Count X Line: 40 x 2
• Module Size (w X H X T): 182 mm x 33.5 mm x 17.6 mm
• Voltage Rating: 4.5 V to 5.5 V
• Operating Temperature Range: - 20 C to + 70 C
• Dot Format: 5 x 8
• Viewing Area (w X H): 134.75 mm x 11.5 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Dots: -
• Lead Free Status / Rohs Status: Details

STANDARD
NAME
5.3 Reset Function
An internal reset circuit automatically initializes the module when the power is turn on.
The following instructions are executed during the initialization.
5.3.1 Power-on reset
allowing interfacing with 4-bit or 8-bit MPUs.
For 8-bit interface data, all eight bus lines (DB0 to DB7) are used.
1) Display clear
2) Set the address counter to 00H
For 4-bit interface data, only four bus lines (DB4 to DB7) are used for transfer. When to use 4-bit
parallel data transfer, DB0 to DB3 keep “H”or “L”. The data transfer between the VFD module and
the MPU is completed after the 4-bit data has been transferred before the four low order bits (for 8-bit
operation. DB0 to DB3).
The busy flag (BF) are performed before transferring the higher 4 bits. BF checks are not required
before transferring the lower 4 bits.
R/W
RS
Fill the DD-RAM with 20H (Space Code)
Set the address counter (ACC) to point DD-RAM.
Fig 4-biti transfer Example (M68)
DOCUMENT NO.
REV.NO
00
11/20
PAGE