HFBR-1533Z Avago Technologies US Inc., HFBR-1533Z Datasheet - Page 3

• Manufacturer Part Number: HFBR-1533Z
• Description: XMITTER FIBER OPTIC VERT 40KBD
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-1533Z

• Wavelength: 600nm
• Voltage - Forward (vf) Typ: 2.02V
• Current - Dc Forward (if): 1A
• Voltage - Dc Reverse (vr) (max): 5V
• Capacitance: 86pF
• Connector Type: Versatile Link
• Data Rate Max: 4Mbps
• Forward Current If: 80mA
• Forward Voltage: 1.67V
• Reverse Voltage Vr: 5V
• Data Transmission Distance: 120ft
• Wavelength Typ: 660nm
• Peak Reflow Compatible (260 C): Yes
• Fiber Material: Plastic
• Leaded Process Compatible: Yes
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Spectral Bandwidth: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-2050

Handling
Versatile Link components are auto-insertable. When
wave soldering is performed with Versatile Link compo-
nents, the optical port plug should be left in to prevent
contamination of the port. Do not use reflow solder
processes (i.e., infrared reflow or vapor-phase reflow).
Nonhalogenated water soluble fluxes (i.e., 0% chloride),
not rosin based fluxes, are recom mended for use with
Versatile Link components.
Versatile Link components are moisture sensitive
devices and are shipped in a moisture sealed bag. If the
components are exposed to air for an extended period
of time, they may require a baking step before the solder-
ing process. Refer to the special labeling on the shipping
tube for details.
Mechanical Dimensions
Horizontal Modules
3
(0.025)
(0.109)
(0.080)
0.64
2.77
2.03
(0.300)
7.62
1. Shelf life in sealed bag: 12 months at < 40°C and < 90% Relative Humidity (RH).
2. After this bag is opened, devices that will be subjected to wave soldering, or
3. Devices require baking, before mounting, if:
4. If baking is required, devices may be baked outside of tube for 20 hours at 75°C.
Bag Seal Date: ______________________________________________________
Note: LEVEL defined by EIA JEDEC Standard J-STD-020
equivalent processing (solder temperature < 260°C for 10 sec) must be:
a) Mounted within 72 hours at factory conditions of ≤ 30°C/60% RH.
b) Stored at ≤ 20% RH.
a) Desiccant changes to PINK.
b) If 2a or 2b are not met.
(0.74)
18.8
(0.073)
1.85
This bag contains
MOISTURE-SENSITIVE
0.64 (0.025) DIA.
(If blank, see barcode label)
3.81 (0.150) MAX.
3.56 (0.140) MIN.
CAUTION
DEVICES
(0.270)
6.86
(0.30)
7.62
(0.020)
0.51
Level
4
(0.400)
10.16
(0.200)
(0.100)
5.08
2.54
(0.050)
1.27
(0.165)
4.19
Recommended Chemicals for Cleaning/Degreasing
Alcohols: methyl, isopropyl, isobutyl. Aliphatics: hexane,
heptane. Other: soap solution, naphtha.
Do not use partially halogenated hydrocarbons such
as 1,1.1 trichloroethane, ketones such as MEK, acetone,
chloroform, ethyl acetate, methylene dichloride, phenol,
methylene chloride, or N-methylpyrolldone. Also, Avago
does not recommend the use of cleaners that use
halogenated hydrocarbons because of their potential
environmental harm.
Vertical Modules
(0.080)
2.03
(0.400)
10.16
(0.27)
6.86
(0.200)
(0.740)
18.80
5.08
(0.720)
18.29