HFBR-1506AM Avago Technologies US Inc., HFBR-1506AM Datasheet - Page 2

• Manufacturer Part Number: HFBR-1506AM
• Description: XMITTER FIBER OPTIC SERCOS SMA
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-1506AM

• Wavelength: 650nm
• Spectral Bandwidth: 21nm
• Voltage - Forward (vf) Typ: 2.1V
• Current - Dc Forward (if): 60mA
• Voltage - Dc Reverse (vr) (max): 3V
• Capacitance: 60pF
• Connector Type: SMA
• Function: Fiber Optic Transmitter for SERCOS, SMA Port
• Product: Transmitter
• Data Rate: 16 MBd
• Diode Capacitance: 60 pF
• Maximum Rise Time: 15 ns
• Maximum Fall Time: 15 ns
• Operating Supply Voltage: 5.5 VDC
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Package / Case: DIP-8
• For Use With: Plastic Optical Fiber
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 1. Link Performance Specification
0 °C to +70 °C unless otherwise noted.
Notes:
1. 60 mA nominal drive current.
2. POF HFBR-Exxyyy 0.23 dB/m worst case attenuation.
3. HCS 10 dB/km worst case attenuation.
4. Including a 3 dB optical safety margin accounting for link service lifetime.
5. Including a 2 dB optical safety margin accounting for link service lifetime.
6. Signaling rate dc to 16 MBd.
Package Information
The transmitters and receivers are housed in a low-
cost, dual-in-line package that is made of high strength,
heat resistant, chemically resistant and UL 94V-O (UL
file # E121562) flame retardant plastic. Both the
transmitter and receiver are coated with a layer of
conductive alloy for better air discharge (ESD)
performance. The package is designed for auto
insertion and wave soldering so it is ideal for high
volume production applications.
Handling and Design Information
When soldering, it is advisable to leave the protective
cap on the unit to keep the optics clean. Good system
performance requires clean port optics and cable
ferrules to avoid obstructing the optical path. Clean
compressed air often is sufficient to remove particles
of dirt; methanol on a cotton swab also works well.
2
Parameter
Link distance with
HFBR-1506AM/2506AM
CAUTION: The small junction size inherent in the design of these components increases the components’ susceptibility to damage
from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of these components
to prevent damage and/or degradation which may be induced by ESD.
Symbol
I
Min
0.1
0.1
Max
45
200
Recommended Chemicals for Cleaning/Degreasing
Alcohols: methyl, isopropyl, isobutyl.
Aliphatics: hexane, heptane.
Other: soap solution, naphtha.
Do not use partially halogenated hydrocarbons such
as 1,1,1 trichloroethane, ketones such as MEK, acetone,
chloroform, ethyl acetate, methylene dichloride,
phenol, methylene chloride or N-methylpyrolldone.
Also, Agilent does not recommend the use of cleaners
that use halogenated hydrocarbons because of their
potential environmental harm.
Unit
m
m
Condition
POF
HCS
Reference
Note 1, 2, 4, 6
Note 1, 3, 5, 6