AXH003A0X4Z Lineage Power, AXH003A0X4Z Datasheet - Page 14

• Manufacturer Part Number: AXH003A0X4Z
• Description: CONVER DC/DC 0.75 3.63V @ 3A SIP
• Manufacturer: Lineage Power
• Series: Austin MiniLynx™r
• Type: Point of Load (POL) Non-Isolated with Remote On/Offr

Specifications of AXH003A0X4Z

• Output: 0.75 ~ 3.63V
• Number Of Outputs: 1
• Power (watts): 10W
• Mounting Type: Through Hole
• Voltage - Input: 2.4 ~ 5.5V
• Package / Case: 5-SIP Module
• 1st Output: 0.75 ~ 3.63 VDC @ 3A
• Size / Dimension: 0.90" L x 0.26" W x 0.40" H (22.9mm x 6.6mm x 10.2mm)
• Power (watts) - Rated: 10W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 94%
• Approvals: CSA, EN, UL, VDE
• Output Power: 11 W
• Input Voltage Range: 2.4 V to 5.5 V
• Output Voltage (channel 1): 0.75 V to 3.63 V
• Output Current (channel 1): 3 A
• Package / Case Size: SIP
• Output Type: Non-Isolated
• Output Voltage: 0.75 V to 3.63 V
• Product: Non-Isolated / POL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 555-1056; CC109104873

Data Sheet
October 2, 2009
Thermal Considerations
Power modules operate in a variety of thermal
environments; however, sufficient cooling should always
be provided to help ensure reliable operation.
Considerations include ambient temperature, airflow,
module power dissipation, and the need for increased
reliability. A reduction in the operating temperature of
the module will result in an increase in reliability. The
thermal data presented here is based on physical
measurements taken in a wind tunnel. The test set-up
is shown in Figure 35. Note that the airflow is parallel to
the long axis of the module as shown in figure 34. The
derating data applies to airflow in either direction of the
module’s long axis.
Figure 34. T ref Temperature measurement location.
The thermal reference point, T
specifications is shown in Figure 34. For reliable
operation this temperature should not exceed 115
The output power of the module should not exceed the
rated power of the module (Vo,set x Io,max).
Please refer to the Application Note “Thermal
Characterization Process For Open-Frame Board-
Mounted Power Modules” for a detailed discussion of
thermal aspects including maximum device
temperatures.
LINEAGE
Airflow
POWER
Tref2
Tref1
ref
2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 3A output current
used in the
Austin MiniLynx
o
C.
Wind T unnel
PWBs
TM
Figure 35. Thermal Test Set-up.
SIP Non-isolated Power Modules:
flow
Air
(0.235)
x
5.97_
(3.0)
76.2_
25.4_
(1.0)
Probe Loc ation
for measuring
airflow and
ambient
temperature
Power Module
14