ATSTK525 Atmel, ATSTK525 Datasheet - Page 21

• Manufacturer Part Number: ATSTK525
• Description: KIT STARTER FOR AT90USB
• Manufacturer: Atmel

Specifications of ATSTK525

• Accessory Type: STK500 Expansion Module
• Processor To Be Evaluated: AT90USBxxx
• Data Bus Width: 8 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: Atmel
• Core Architecture: AVR
• Silicon Core Number: AT90USB
• Kit Contents: Board Docs
• Rohs Compliant: Yes
• For Use With/related Products: AT90USB Devices
• For Use With: ATEVK525 - ADD ON KIT FOR STK525ATSTK500 - PROGRAMMER AVR STARTER KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.8.2
2.8.3
STK525 Hardware User Guide
Programming with AVR ISP mkII Programmer
Programming with STK500
The HWB pin of the AT90USBxxx allows to force the bootloader section execution after
reset. (Refer to AT90USBxxx datasheet section “boot loader support”). To force
bootloader execution, operate as follows:
For more information about the USB bootloader and FLIP software, please refer to the
‘USB bootloader datasheet’ document and ‘FLIP User Manual’.
The AT90USBxxx can be programmed using specific SPI serial links. This sub section
will explain how to connect the programmer.
The Flash, EEPROM and all Fuses and Lock Bits options ISP-programmable can be
programmed individually or with the sequential automatic programming option.
The AVR ISP mkII programmer is a compact and easy-to-use In-System Programming
tool for developing applications with AT90USBxxx. Due to the small size, it is also an
excellent tool for field upgrades of existing applications.
The AVR ISP programming interface is integrated in AVR Studio®.
To program the device using AVR ISP programmer, connect the 6-wire cable on the ISP
connector of the STK525 as shown in Figure 2-20.
Note:
Figure 2-20 . Programming from AVR ISP mkII programmer
The AT90USBxxx can be programmed using the serial programming mode in the AVR
Studio STK500 software. The software interface (In-System Programming of an external
target system) is integrated in AVR Studio®.
Press both “RST” and “HWB” push buttons
First release the “RST” push button
Release the “HWB” push button
See AVR Studio® on-line Help for information.
Using the STK525
7608A–AVR–04/06
2-21