AC164112 Microchip Technology, AC164112 Datasheet - Page 187

• Manufacturer Part Number: AC164112
• Description: VOLTAGE LIMITER MPLAB ICD2 VPP
• Manufacturer: Microchip Technology

Specifications of AC164112

• Accessory Type: Voltage Limiter
• Product: Cable Assemblies
• Features: Programming And Debugging The Latest PIC12/PIC16/PIC18 Products
• Development Tool Type: Hardware - Eval/Demo Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: MPLAB®
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: MPLAB ICD 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REGISTER 17-4:
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
R/W-0
SMP
SMP: SPI Data Input Sample Phase bit
1 = Slew Rate Control (limiting) disabled. Operating in I
0 = Slew Rate Control (limiting) enabled. Operating in I
CKE: SPI Clock Edge Select bit
This bit must be maintained clear. Used in SPI mode only.
D/A: DATA/ADDRESS bit (I
1 = Indicates that the last byte received or transmitted was data
0 = Indicates that the last byte received or transmitted was address
P: Stop bit
This bit is cleared when the SSP module is disabled, or when the Start bit is detected last.
1 = Indicates that a Stop bit has been detected last (this bit is ‘0’ on Reset)
0 = Stop bit was not detected last
S: Start bit
This bit is cleared when the SSP module is disabled, or when the Stop bit is detected last.
1 = Indicates that a Start bit has been detected last (this bit is ‘0’ on Reset)
0 = Start bit was not detected last
R/W: READ/WRITE bit Information
This bit holds the R/W bit information following the last address match. This bit is only valid from the address match
to the next Start bit, Stop bit or ACK bit.
1 = Read
0 = Write
UA: Update Address bit (10-bit I
1 = Indicates that the user needs to update the address in the SSPADD register
0 = Address does not need to be updated
BF: Buffer Full Status bit
Receive:
1 = Receive complete, SSPBUF is full
0 = Receive not complete, SSPBUF is empty
Transmit:
1 = Transmit in progress, SSPBUF is full
0 = Transmit complete, SSPBUF is empty
R/W-0
CKE
SSPSTAT: SYNCHRONOUS SERIAL PORT STATUS REGISTER (I
W = Writable bit
‘1’ = Bit is set
D/A
R-0
2
C mode only)
2
C mode only)
R-0
P
PIC16F72X/PIC16LF72X
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R-0
S
2
2
C Fast Mode (400 kHz).
C Standard Mode (100 kHz and 1 MHz).
R/W
R-0
x = Bit is unknown
R-0
UA
DS41341E-page 187
2
C MODE)
R-0
BF
bit 0