SCFLXRAYADPTS12 Freescale Semiconductor, SCFLXRAYADPTS12 Datasheet - Page 15

• Manufacturer Part Number: SCFLXRAYADPTS12
• Description: ADAPTER BOARD FRDC
• Manufacturer: Freescale Semiconductor

Specifications of SCFLXRAYADPTS12

• Accessory Type: *
• For Use With/related Products: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.8
The signals described in
peripherals.
3.9
Table 6
Freescale Semiconductor
Serial Module Signal
Serial Module Signal
Request To Send
Clear To Send
Transmit Data
Receive Data
Timer Output
describes the Timer module signal which provides an external interface to Timer0.
Serial Module Signals
Timer Module Signals
The RXD0/GPIO46 and SDA1/RXD1/GPIO44 are the inputs on which serial data is received by the
DUART. Data is sampled on RxD[1:0] on the rising edge of the serial clock source, with the least
significant bit received first.
The DUART transmits serial data on the TXD0/GPIO45 and SCL1/TXD1/GPIO10 output signals. Data
is transmitted on the falling edge of the serial clock source, with the least significant bit transmitted (LSB)
first. When no data is being transmitted or the transmitter is disabled, these two signals are held high.
TxD[1:0] are also held high in local loopback mode.
The DDATA3/RTS0/GP104 and DDATA1/RTS1/SDATA2_BS2/GPIO2 request-to-send outputs indicate
to the peripheral device that the DUART is ready to send data and requires a clear-to-send signal to
initiate transfer.
Peripherals drive the DDATA2/CTS0/GPIO3 and DDATA0/CTS1/SDATA0_SDIO1/GPIO1 inputs to
indicate to the SCF5250 serial module that it can begin data transmission.
The SDATAO1/TOUT0/GPIO18 programmable output pulse or toggle on various timer events.
Table 5
SCF5250 Data Sheet:
transfer serial data between the two UART modules and the external
Table 5. Serial Module Signals
Table 6. Timer Module Signals
Technical
Description
Description
Data,
Rev. 1.3
15