XLT18SO-1 Microchip Technology, XLT18SO-1 Datasheet - Page 30

• Manufacturer Part Number: XLT18SO-1
• Description: SOCKET TRANSITION 18SOIC 300MIL
• Manufacturer: Microchip Technology

Specifications of XLT18SO-1

• Module/board Type: *
• Svhc: No SVHC (15-Dec-2010)
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: MPLAB™ICE
• For Use With: AC162083 - HEADER MPLAB ICD2 PIC16F616 8/14DVA1006 - DEVICE ADAPTER ICE2000 18DIPDVA1001 - ADAPTER FOR PIC16F716 18DIPDAF18-4 - DEVICE ADAPTER FOR ICE4000DAF30-4 - DEVICE ATP FOR ICE4000AC162054 - HEADER INTERFACE ICD2 16F716DVA18XP180 - DEVICE ADAPTER 18F1320 PDIP 18LDAC162053 - HEADER INTERFACE ICD,ICD2 18DIPDVA16XP185 - ADAPTER DEVICE ICE 18DIP/SOICDVA16XP183 - ADAPTER ICE 18DIP/SOIC/SSOPDVA16XP182 - ADAPTR 712,716 DIP,SOIC,SSOPDVA16XP180 - ADAPTER DEVICE FOR MPLAB-ICEDVA12XP080 - ADAPTER DEVICE FOR MPLAB-ICE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Not applicable / Not applicable

Transition Socket Specification
SSOP TRANSITION SOCKET
An SSOP transition socket and associated hardware is
shown in Figure 3.
FIGURE 3: SSOP TRANSITION SOCKET
The SSOP transition sockets are similar to the SOIC
transition sockets. There are two parts to the SSOP
transition socket:
1.
2.
The following SSOP transition sockets have been dis-
continued:
• XLT14SS: One adapter socket and three 14-lead
• XLT20SS: One adapter socket and three 20-lead
• XLT20SS1: One adapter socket and three 20-lead
• XLT28SS: One adapter socket and three 28-lead
• XLT28SS2: One adapter socket and three 28-lead
See the drawings in this section for layout dimensions
and clearances for tall components.
DS51194S-page 30
Note:
SSOP headers
SSOP headers
SSOP headers
SSOP headers
SSOP headers for PIC16C55/57
Adapter socket that connects to the PDIP device
adapter.
SSOP header that gets soldered down to the
target application.
To keep the leads straight during assembly
and shipping, the SSOP headers are
shipped with break-away tabs attached to
the leads. Please remove the break-away
tabs before applying power to the target
system. Be careful not to bend the leads
prior to soldering to the target application.
Adapter Socket
SSOP Header
Gold Standoffs/
Adapters
PDIP Device Adapter
Cable to Processor Module
SSOP Transition Socket
Target/Application Board
XLT14SS (Discontinued – see XLT14SS-1)
14-lead DIP to 0.8 mm Adapter Socket
14-lead SSOP Header
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN
INCHES.
Break-away tabs are to be removed prior to providing power.
0.035
A
G
C
TOP
VIEW
BOTTOM
VIEW
SIDE
VIEW
FRONT/
REAR
VIEW
0.300
B
0.023
C
SIDE
VIEW
 2010 Microchip Technology Inc.
0.080
VIEW
TOP
D
FRONT/
REAR
VIEW
0.186
A
Shipped with
break-away tabs
attached to leads
Remove prior to
providing power
* Top drawing shown
with clip-on shrouds
installed
E
0.043
F
B
F
0.025
G
E
D