ATAVRMC200 Atmel, ATAVRMC200 Datasheet - Page 18
![KIT EVAL FOR AT90PWM3 ASYNC](/photos/9/4/90457/atavrmc200_sml.jpg)
ATAVRMC200
Manufacturer Part Number
ATAVRMC200
Description
KIT EVAL FOR AT90PWM3 ASYNC
Manufacturer
Atmel
Series
AVR®r
Specifications of ATAVRMC200
Main Purpose
Power Management, Motor Control
Embedded
Yes, MCU, 8-Bit
Utilized Ic / Part
AT90PWM3
Primary Attributes
AC Asynchronous Motors & Brushless DC (BLDC) Motors
Secondary Attributes
Short-Circuit & Thermal Protection
Processor To Be Evaluated
AT90PWM3
Interface Type
RS-232, ISP
Applications
Motor Control
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
4.1.2
ATAVRMC200 Hardware User Guide
Programming with STK500
Figure 4-1 . Programming from AVR ISP (or JTAGICE MKII) programmer
The AT90PWM3 can be programmed using the serial programming mode in the AVR
Studio STK500 software. The software interface (In-System Programming of an external
target system) is integrated in AVR Studio.
To program the device using ISP from STK500, connect the 6-wire cable between the
ISP6PIN connector of the STK500 board and the ISP connector of the ATAVRMC200
as shown in Figure 4-2.
The STK500 board delivers sufficient power to supply the AT90PWM3 of the
ATAVRMC200 board, so it is not necessary to supply the ATAVRMC200 board when it
is used with the STK500.
Note:
See AVR Studio on-line Help for information.
RESET
SCK
MISO
ISP CON
7638A–AVR–05/06
1 2
3 4
5 6
VCC
MOSI
GND
15