CDB5463U Cirrus Logic Inc, CDB5463U Datasheet - Page 9

• Manufacturer Part Number: CDB5463U
• Description: BOARD EVAL & SOFTWARE CS5463 ADC
• Manufacturer: Cirrus Logic Inc
• Type: A/Dr

Specifications of CDB5463U

• Main Purpose: Power Management, Energy/Power Meter
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CS5463
• Primary Attributes: 1-Phase, Energy-to-Frequency Output
• Secondary Attributes: GUI, USB, SPI Interfaces
• Product: Data Conversion Development Tools
• Maximum Clock Frequency: 4 MHz
• Interface Type: USB
• Supply Voltage (max): 5 V
• Supply Voltage (min): 3.3 V
• For Use With/related Products: CS5463
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1553

CDB5463U
2.3.1
Setup Menu
Setup allows user to establish a USB communication connection with CDB5463U board or select a pre-
viously saved data file for further analysis.
If the USB item in the Setup menu is selected, the evaluation software will poll the CDB5463U, verifying
the serial communication link is ready. At this point, the USB menu item is checked indicating that the PC
has successfully communicated with CDB5463U evaluation board, and device and micro-code version
information are read from the board and displayed on the screen. See Figure 3. Due to improvements to
the software or new features being added, the version displayed may be different than the image shown
here.
Figure 3. Setup Menu Showing Successful USB Connection
If the evaluation software is unable to establish a communication link with the CDB5463U board, a mes-
sage will appear, indicating that the initial communication has failed. See Figure 4.
Figure 4. USB Error Message
Check to verify that the USB cable is connected properly and the power supply is on and connected prop-
erly to the CDB5463U. Reset the board (press the RESET button on the board) and try to setup the USB
connection again.
DS805DB2
9