SI5367/68-EVB Silicon Laboratories Inc, SI5367/68-EVB Datasheet - Page 11
![no-image](/images/manufacturer_photos/0/6/609/silicon_laboratories_inc_sml.jpg)
SI5367/68-EVB
Manufacturer Part Number
SI5367/68-EVB
Description
BOARD EVAL FOR SI5367/68
Manufacturer
Silicon Laboratories Inc
Specifications of SI5367/68-EVB
Main Purpose
Timing, Clock Generator
Utilized Ic / Part
SI5367, SI5368
Processor To Be Evaluated
Si5367 and Si5368
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Secondary Attributes
-
Embedded
-
Primary Attributes
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
7. EVB Software Installation
The following sections describe how to install the EVB software.
Note: These programs can control any of the Any-Rate Precision Clock devices including the Si5316, Si532x, and
Si536x devices. This software can be installed once per PC and used for all available Precision Clock EVBs.
7.1. PC System Requirements
7.2. Microsoft .NET Framework Installation
The Microsoft .NET Framework is required before installing and running the Precision Clock EVB software. Details
and installation information about the .NET Framework are available via a shortcut in the NETFramework directory
on the installation CD or at the following web site:
http://www.microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-
034D1E7CF3A3&displaylang=en
Contact your system administrator for more details.
7.3. Precision Clock EVB Driver
The EVB requires a driver to be controlled by the software. The following section lists the steps for installing and
uninstalling the driver.
7.3.1. Install
The driver files must be installed before the EVB is connected to the PC via the USB cable. This installation usually
only needs to be completed once per PC.
1. Navigate to the "EVBDriver" directory on the CD.
2. Double-click on the PreInstaller.exe file to run the installation program for the driver.
3. Click Install in the dialog box. Be sure to select a location on the PC's hard drive for the files, if necessary.
4. If the PC is running Windows XP, click Continue Anyway when the wizard warns that the driver does not pass
After the above files are installed, the operating system will be able to identify the EVB's USB controller when the
EVB is connected to the PC. The following steps occur when the EVB is connected to the PC for the first time.
7.3.2. Uninstall
In the Control Panel, select Add/Remove Programs. Then select "Precision Clock EVB Driver Set" and click
Change/ Remove. The wizard will remove the associated files.
Microsoft Windows 2000 or Windows XP
USB 1.1 or USB 2.0
3 MB of hard drive space
1024 x 768 screen resolution or greater (1280 x 1024 recommended)
Microsoft .NET Framework 1.1
Precision Clock EVB Driver (Note: The Precision Clock EVB driver is provided with the installation files.)
the Windows Logo verification for XP.
For Windows 2000, when the EVB is connected to the PC, the operating system will display a dialog box
indicating that it found new hardware. No other action is required. The driver installation can be verified in the
Device Manager under the USB section; look for "Precision Clock EVB" in the list.
For Windows XP:
1. When the EVB is connected to the PC, the Found New Hardware wizard will appear. Use the default
2. Again, ignore the warning about the driver not passing verification by clicking Continue Anyway.
3. Click Finish to complete the install.
settings that will tell the PC to look for the driver.
Rev. 0.4
Si5367/68-EVB
11