MCP3424EV Microchip Technology, MCP3424EV Datasheet - Page 5

• Manufacturer Part Number: MCP3424EV
• Description: EVALUATION BOARD FOR MCP3424
• Manufacturer: Microchip Technology

Specifications of MCP3424EV

• Number Of Adc's: 1
• Number Of Bits: 18
• Sampling Rate (per Second): 3.75 ~ 240
• Data Interface: I²C
• Inputs Per Adc: 4 Differential
• Input Range: ±2.048 V
• Power (typ) @ Conditions: 135µA @ 240sps
• Voltage Supply Source: Single Supply
• Operating Temperature: -55°C ~ 125°C
• Utilized Ic / Part: MCP3424
• Processor To Be Evaluated: MCP3424
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

INTRODUCTION
DOCUMENT LAYOUT
© 2008 Microchip Technology Inc.
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
Select the Help menu, and then Topics to open a list of available on-line help files.
This chapter contains general information that will be useful to know before using the
MCP3424 Evaluation Board. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Revision History
This document describes how to use the MCP3424 Evaluation Board as a develop-
ment tool to emulate and debug firmware on a target board. The manual layout is as
follows:
• Chapter 1. “Quick Start Instructions” – this chapter provides an overview of the
• Appendix A. “Schematic and Layouts” – shows the schematic and layout
• Appendix B. “Bill Of Materials (BOM)” – lists the parts used to build the
MCP3424 Evaluation Board and instructions on how to use the MCP3424 Evalua-
tion Board with the PICkit Serial Analyzer.
diagrams for the MCP3424 Evaluation Board.
MCP3424 Evaluation Board.
NOTICE TO CUSTOMERS
MCP3424 EVALUATION BOARD
Preface
USER’S GUIDE
®
IDE on-line help.
DS51737A-page 1