CDB5530U Cirrus Logic Inc, CDB5530U Datasheet - Page 8

• Manufacturer Part Number: CDB5530U
• Description: BOARD EVAL FOR CS5530
• Manufacturer: Cirrus Logic Inc
• Type: A/Dr

Specifications of CDB5530U

• Number Of Adc's: 1
• Number Of Bits: 24
• Sampling Rate (per Second): 3.84k
• Data Interface: Serial
• Inputs Per Adc: 1 Differential
• Input Range: ±2.5 V
• Power (typ) @ Conditions: 35mW @ 5 V
• Voltage Supply Source: Analog and Digital, Dual ±
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: CS5530
• Product: Data Conversion Development Tools
• Resolution: 24 bit
• Maximum Clock Frequency: 4 MHz
• Interface Type: USB
• Supply Voltage (max): 5 V
• Supply Voltage (min): 3.3 V
• For Use With/related Products: CS5530
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1158

2. SOFTWARE
The evaluation board comes with software and a USB cable to link the evaluation board to the PC. The
software is designed to run under Windows
Important: DO NOT connect the evaluation board to the PC until you have completed the installation procedure and
have installed the USB drivers as described below.
2.1
2.1.1
2.1.2
2.1.3
Run the program by selecting Start
2.2
Before launching the evaluation program, the user should select the proper jumper settings as described
in Section 1.
8
Installation Procedure
Using the Software
1. Ensure the CDB5530U USB cable is disconnected from the PC.
1. Apply power to the CDB5530U. Press and release the Reset switch, S1.
2. Open GUI software installation folder CDB553x_cvidistkit.Eval5534U
3. Run SETUP.EXE by double clicking on the filename.
4. Select Next, I Accept License Agreement, Next, Next, Finish.
2. Use the included USB cable to connect the CDB5530U to the PC. The PC operating system should
3. From the installation wizard, select Install from a list or specific location (Advanced). Select Search
4. Select Include this location in the search.
5. Click the Browse... button.
6. Go to folder C:/Program Files/Eval5534U/Driver and click OK.
7. Press the Next button.
8. A Hardware Installation dialog will appear. Press Continue Anyway.
9. Select Browse... and go to folder C:/Program Files/Eval5534U/Driver. Press Open.
10. A Files Needed dialog will appear. Press OK.
11. The Found New Hardware wizard will appear. Press the Finish button.
CDB5530U GUI Software Installation Instructions
Installing the USB Drivers
Running the GUI
automatically launch the Found New Hardware wizard.
for the best driver in these locations.
All Programs
®
2000 or later.
Eval5534U
Eval5534_U.
Volume1.
CDB5530U
DS742DB1