NCP5006EVB ON Semiconductor, NCP5006EVB Datasheet - Page 2

• Manufacturer Part Number: NCP5006EVB
• Description: EVAL BOARD FOR NCP5006
• Manufacturer: ON Semiconductor

Specifications of NCP5006EVB

• Design Resources: NCP5006 Demo Board BOM NCP5006EVB Gerber Files NCP5006 Demo Board Schematic
• Current - Output / Channel: 15mA
• Outputs And Type: 1, Non-Isolated
• Voltage - Output: 22V
• Voltage - Input: 3.6V
• Utilized Ic / Part: NCP5006
• Core Chip: NCP5006
• Topology: Boost
• No. Of Outputs: 1
• Development Tool Type: Hardware - Eval/Demo Board
• Mcu Supported Families: NCP5006
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: NCP5006
• Other names: NCP5006EVBOS

5. If current monitor is necessary, connect a short jumper (5 cm) across JP1 to read current and connect
6. Connect one analogue probe to pin Vout to read the output voltage.
7. Connect a short DVM cable to pin FB to read the feedback voltage.
8. Turn ON the power supply: the LED shall come up and you can observe the waveforms as depicted in
the current sensor.
Note: Since this pin is internally connected to a very high impedance circuit, care must be observed to
minimize noise pick–up as such noise will downgrade the operating performances. In case of doubt with
the waveforms captured with the current probe, remove the DVM probe from the FB pin and double
check the operation.
the NCP5006 data sheet (and given below).