MCP6V01DM-VOS Microchip Technology, MCP6V01DM-VOS Datasheet - Page 17

• Manufacturer Part Number: MCP6V01DM-VOS
• Description: DEMO BOARD FOR MCP6V01
• Manufacturer: Microchip Technology

Specifications of MCP6V01DM-VOS

• Channels Per Ic: 1 - Single
• Amplifier Type: Chopper (Zero-Drift)
• Output Type: Rail-to-Rail
• Slew Rate: 0.5 V/µs
• Current - Output / Channel: 22mA
• Operating Temperature: -40°C ~ 125°C
• Voltage - Supply, Single/dual (±): 1.8 V ~ 5.5 V
• Board Type: Fully Populated
• Utilized Ic / Part: MCP6V01
• Silicon Manufacturer: Microchip
• Application Sub Type: Operational Amplifier
• Kit Application Type: Amplifier
• Silicon Core Number: MCP6V01, MCP6V03, MCP6V06, MCP6V08
• Kit Contents: Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• -3db Bandwidth: -
• Current - Supply (main Ic): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3.1
3.2
© 2009 Microchip Technology Inc.
INTRODUCTION
CHANGING THE DUT
This chapter shows simple modifications to the MCP6V01 Input Offset Demo Board:
• Changing the DUT
• Connecting a Chip Select Pin to Ground
Change the DUT (see Figure 3-1) to the MCP6V06 Op Amp as follows:
1. Remove U1 from the PCB, using a de-soldering tool.
2. Solder a MCP6V06 op amp in its place. Use a MCP6V06 in a SOIC-8 package.
FIGURE 3-1:
Chapter 3. Possible Modifications
Pin 1 is next to the U1 reference designator on the PCB (not next to the DUT
label)
Label
Location and Orientation of DUT.
DUT’s Pin 1
DEMO BOARD USER’S GUIDE
Draft
MCP6V01 INPUT OFFSET
Reference Designator
DS51801A-page 13