DV164122 Microchip Technology, DV164122 Datasheet - Page 49

• Manufacturer Part Number: DV164122
• Description: ANALYZER SRL PICKIT W/DEMO BOARD
• Manufacturer: Microchip Technology
• Series: PICkit™r
• Type: MCUr

Specifications of DV164122

• Contents: PICkit™ Serial Analyzer, 28-pin Demo Board, USB Cable, and Software with Documentation CD
• Processor To Be Evaluated: PIC16F886
• Interface Type: USB
• Silicon Manufacturer: Microchip
• Kit Application Type: Interface
• Application Sub Type: USB
• Silicon Family Name: PIC16F
• Kit Contents: PICkit Serial Analyzer, Demo Board, USB Cable, Software
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: PIC16F886
• For Use With: PKSERIAL-SPI1 - BOARD DEMO PICKIT SERIAL SPIPKSERIAL-I2C1 - BOARD DEMO PICKIT SERIAL I2C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q3260228

© 2007 Microchip Technology Inc.
• Memory Block – Check if the register is to be treated as a contiguous block of
• Data Size – Number of bytes in the register. If the register is not a Memory Block,
• Data – Stores the data belonging to the register (Hex format)
• Use Large Data Array – If the data in the register is larger than 8 bytes, press this
Once the parameters are entered, they can be saved as an I
• File->Open – Open an existing profile (*.pfl)
• File->Save – Save or replace a profile (*.pfl)
• Clear All – Resets (clears) all registers
PICkit SERIAL SLAVE ADDRESS
In the groupbox ‘PICkit Serial Analyzer Slave Address’ enter the hex representation of
the slave address you want the PICkit Serial Analyzer to respond to, then press the
‘Apply’ button. This writes the address into the Analyzer firmware.
MODE
If you wish to run the slave profile from the PC (GUI) there is nothing more to do. If you
wish to run it from the PICkit Serial Analyzer, press the appropriate radio button in the
‘Mode’ groupbox.
memory, such as an EE array.
this many bytes will be returned when the register is read. If the register is a
Memory Block, the profile generator will return one byte at a time until it is
Nacked.
button to display a 256 byte array into which you may enter data.
Note:
Note:
If you are running the profile from the PICkit Serial Analyzer and you wish
to change the profile, you must press the ‘Apply Profile’ button to load the
changes into the firmware.
When running the profile from the PICkit Serial Analyzer instead of the PC,
you are limited to 255 data and configuration bytes (profile length). If you
attempt to write too large of a profile to the PICkit Serial Analyzer, an error
message will be sent to the Transactions window telling you your profile
length.
I
2
C™ Slave Communications
2
C Slave Profile file (*.pfl).
DS51647B-page 43