DV164122 Microchip Technology, DV164122 Datasheet - Page 71

• Manufacturer Part Number: DV164122
• Description: ANALYZER SRL PICKIT W/DEMO BOARD
• Manufacturer: Microchip Technology
• Series: PICkit™r
• Type: MCUr

Specifications of DV164122

• Contents: PICkit™ Serial Analyzer, 28-pin Demo Board, USB Cable, and Software with Documentation CD
• Processor To Be Evaluated: PIC16F886
• Interface Type: USB
• Silicon Manufacturer: Microchip
• Kit Application Type: Interface
• Application Sub Type: USB
• Silicon Family Name: PIC16F
• Kit Contents: PICkit Serial Analyzer, Demo Board, USB Cable, Software
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: PIC16F886
• For Use With: PKSERIAL-SPI1 - BOARD DEMO PICKIT SERIAL SPIPKSERIAL-I2C1 - BOARD DEMO PICKIT SERIAL I2C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q3260228

© 2007 Microchip Technology Inc.
USART BAUD
Enter the desired USART symbol rate (Baud) in the text box.
FIGURE 8-2:
SCRIPT TIMEOUT
When sending scripts, the software will wait a maximum of Script Timeout ms to receive
a script complete tag before issuing an error. If your hardware is slow to respond or
you are transferring a lot of data, you may need to increase the Script Timeout to avoid
errors.
EVENT MARKERS
• Abrt Mac Exe – Enable event marker: abort ‘macro’ execution
• Macro Loop – Enable event marker: top of ‘macro’ loop
• Mac Lp 65536 – Enable event marker: ‘macro’ loop count overflow (i.e., 65536)
• Mac Lp Done – Enable event marker: ‘macro’ loop iterations complete
• Timeout Timer1 – Enable event marker: Timer1 expired
• Timeout Timer2 – Enable event marker: Timer2 expired
• Status Error – Enable event marker: change in status byte
• Read Byte – Enable event marker – read byte
• Write Byte – Enable event marker – write byte
• Status Error – Enable event marker – change in USART status byte
• Break TX – Enable event marker – A “Break” has been transmitted
ADVANCED OPTIONS
• Disable LED2 Default – Disable default LED2 behavior (LED2 = Yellow ‘Target’
• Disable LED1 Default – Disable default LED1 behavior (LED1 = Red ‘Busy’ LED)
• Enable Switch Test – Enable low level switch test:
The USB port current limit is set to 100 mA. If the target plus PICkit Serial Analyzer
exceeds this current limit, the USB port will turn off. The target may be powered
externally if more power is required.
LED)
USART ASYNCHROUNOUS CONFIGURE
COMMUNICATIONS MODE – ADVANCED VIEW
CAUTION
DS51647B-page 65