DEMOJM Freescale Semiconductor, DEMOJM Datasheet - Page 9

• Manufacturer Part Number: DEMOJM
• Description: KIT DEMO FOR JM MCU FAMILY
• Manufacturer: Freescale Semiconductor
• Series: ColdFire®r
• Type: MCUr

Specifications of DEMOJM

• Contents: Base Board, JM60 and JM128 Daughter Cards, Documentation and Software
• Processor To Be Evaluated: MC9S08JM60
• Data Bus Width: 32 bit
• Interface Type: USB
• Silicon Manufacturer: Freescale
• Core Architecture: Coldfire, HCS08
• Core Sub-architecture: Coldfire V1, HCS08
• Silicon Core Number: MCF51, MC9S08
• Silicon Family Name: Flexis - MCF51JM, Flexis - S08JM
• Rohs Compliant: Yes
• For Use With/related Products: MCF51JM128, MC9S08JM60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Test Board by Running Quick
Start Application
Now that you have successfully
completed the software and hardware
setup, test your board by running the
Quick Start Application pre-loaded in the
microcontroller’s on-chip flash memory.
The programmed application is the
HID class software included in the
complimentary USB-LITE stack by CMX
for MCF51JM128. The HID class software
includes several examples (mouse,
keyboard, etc.) with the default example
turning your board and making it a simple
HID mouse by exercising the JM128
on-chip USB 2.0 OTG controller.
The example takes control of your
computer’s mouse cursor and moves
it continuously in a back and forth
motion following USB enumeration.
1. Turn the SYSTEM POWER switch to the “on”
2. Connect provided A to mini-B black USB cable
position. The red POWER LED will illuminate
and application will start.
from a free USB port on your computer to the
mini-AB USB connector on the board.
STEP
5
3. Your computer will recognize the MCF51JM128
4. Now that your board is functional, try out the
For more information on PEMICRO Embedded
Multilink Toolkit read the DEMOJM User
Manual (DEMOJMUM.pdf) included in the
“Documentation” section of DVD. For new and
upgraded utilities to PEMICRO Embedded
Multilink Toolkit, visit www.pemicro.com.
as an HID mouse device and begin installation
(no user interaction needed). When hardware
installation is complete, the MCF51JM128 will
control your mouse cursor by moving it back
and forth.
labs discussed in the DEMO51JM128 Labs
document (DEMO51JM128LAB) included in
the “Training” section of the DVD. These labs
will guide you step by step through the all the
HID (device & host), CDC, and Mass Storage
examples included in the complimentary
USB-LITE stack by CMX for MCF51JM128.