C8051F800DK Silicon Laboratories Inc, C8051F800DK Datasheet - Page 3
![KIT DEV C8051F800](/photos/28/94/289400/mcudevkit_sml.jpg)
C8051F800DK
Manufacturer Part Number
C8051F800DK
Description
KIT DEV C8051F800
Manufacturer
Silicon Laboratories Inc
Type
MCUr
Specifications of C8051F800DK
Contents
Board, Cables, CD, Debugger, Power Supply
Processor To Be Evaluated
C8051F800
Data Bus Width
16 bit
Interface Type
USB
Operating Supply Voltage
7 V to 15 V
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
For Use With/related Products
C8051F8xx
Lead Free Status / Rohs Status
Supplier Unconfirmed
Other names
336-1797
4.3. CP210x USB to UART VCP Driver Installation
The C8051F800 Target Board includes a Silicon Labs CP2103 USB-to-UART Bridge Controller. Device drivers for
the CP2103 need to be installed before PC software such as HyperTerminal can communicate with the target
board over the USB connection. If the "Install CP210x Drivers" option is selected during installation, a driver
“unpacker” utility will launch.
1. Follow the steps to copy the driver files to the desired location. The default directory is C:\SiLabs\MCU\CP210x.
2. The final window will give an option to install the driver on the target system. Select the “Launch the CP210x
3. If selected, the driver installer will now launch, providing an option to specify the driver installation location. After
4. If the “Launch the CP210x VCP Driver Installer” option was not selected in step 3, the installer can be found in
5. To complete the installation process, connect the included USB cable between the host computer and the USB
6. If needed, the driver files can be uninstalled by selecting “Silicon Labs CP210x USB to UART Bridge Driver
5. Software Overview
The following software is necessary to build a project, download code to, and communicate with the target
microcontroller.
Other useful software that is provided on the development kit CD and the Silicon Labs Downloads
(www.silabs.com/mcudownloads) website includes:
5.1. Silicon Labs IDE
The Silicon Labs IDE integrates a source-code editor, source-level debugger and in-system programmer. The use
of third-party compilers, assemblers, and linkers is also supported. This development kit includes evaluation
versions of commercial C compilers and assemblers which can be used from within the Silicon Labs IDE.
5.1.1. Third Party Toolsets
The Silicon Labs IDE has native support for many 8051 compilers. Natively-supported tools are as follows:
Specific instructions for integrating each of the supported tools can be found in the application notes section of the
CD, or on the Silicon Labs website (http://www.silabs.com).
VCP Driver Installer” option if you are ready to install the driver.
pressing the “Install” button, the installer will search your system for copies of previously installed CP210x
Virtual COM Port drivers. It will let you know when your system is up to date. The driver files included in this
installation have been certified by Microsoft.
the location specified in step 2, by default C:\SiLabs\MCU\CP210x\Windows_2K_XP_S2K3_Vista. At this
location, run CP210xVCPInstaller.exe.
connector (P5) on the C8051F800 Target Board. Windows will automatically finish the driver installation.
Information windows will pop up from the taskbar to show the installation progress.
Removal” option in the “Add or Remove Programs” window.
Silicon Labs Integrated Development Environment (IDE)
8051 Toolset
Configuration Wizard 2
Keil µVision2 and µVision3 Drivers
MCU Production Programmer and Flash Programming Utilities
QuickSense
Keil
IAR
Raisonance
Tasking
SDCC
TM
Studio (available at www.silabs.com/quicksense)
Rev. 0.1
C8051F800-DK
3