MPC8313E-RDBB Freescale Semiconductor, MPC8313E-RDBB Datasheet - Page 2

• Manufacturer Part Number: MPC8313E-RDBB
• Description: BOARD CPU 8313E VER 2.1
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC II™ PROr
• Type: MPUr

Specifications of MPC8313E-RDBB

• Contents: Board
• Processor To Be Evaluated: MPC8xxx
• Data Bus Width: 32 bit
• Interface Type: Ethernet, USB, JTAG, SPI, UART
• Dimensions: 170 mm x 170 mm
• Operating Supply Voltage: 3.3 V
• For Use With/related Products: MPC8313E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MPC8313E RDB Hardware
Use this manual in conjunction with the following documents:
1
This section covers the features, block diagram, specifications, and mechanical data of the MPC8313E
RDB.
1.1
The board features are as follows:
2
•
•
•
•
•
•
MPC8313E PowerQUICC™ II Pro Integrated Communications Processor Family Reference
Manual (MPC8313ERM)
MPC8313E PowerQUICC II Pro Processor Hardware Specifications (MPC8313EEC)
“Hardware and Layout Design Considerations for DDR Memory Interfaces” (AN2582)
MPC8313E RDB Hardware
CPU: Freescale MPC8313E running at 333/166 MHz; CPU/coherent system bus (CSB)
Memory subsystem:
— 128 Mbyte unbuffered DDR2 SDRAM discrete devices
— 8 Mbyte flash single-chip memory
— 32 Mbyte NAND flash memory
— 256 Kbit M24256 serial EEPROM
— SD connector to interface with the SD memory card in SPI mode
Interfaces:
— 10/100/1000 BaseT Ethernet ports:
Features
– eTSEC1, RGMII: five 10/100/1000 BaseT RJ-45 interfaces using Vitesse
switch, or selectable one 10/100/1000 BaseT RJ-45 interface using Marvell
in REVC board
The normal function of the product may be disturbed by strong
electromagnetic interference. If so, simply reset the product to resume
normal operation by following the instructions in the manual. If normal
function does not resume, use the product in another location.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy. If it is
not installed and used in accordance with the instruction manual, it may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his or her
own expense.
PowerQUICC™ MPC8313E Reference Design Board (RDB), Rev. 4
NOTE
Freescale Semiconductor
™
™
VSC7385 L2
88E1111 PHY