RCDK8C Renesas Electronics America, RCDK8C Datasheet - Page 7
![KIT DEV EVAL FOR CAN R8C/23](/photos/9/23/92393/rcdk8c_sml.jpg)
RCDK8C
Manufacturer Part Number
RCDK8C
Description
KIT DEV EVAL FOR CAN R8C/23
Manufacturer
Renesas Electronics America
Type
MCUr
Datasheet
1.RCDK8C.pdf
(29 pages)
Specifications of RCDK8C
Contents
2 Target Boards with CAN Transceiver, E8 Emulator, Cables and CD-ROM
For Use With/related Products
R8C/23
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Chapter 3. Power Supply
3.1. Requirements
This Renesas Starter Kit operates from a 3V to 5V power supply.
A diode provides reverse polarity protection only if a current limiting power supply is used.
All Renesas Starter Kit boards are supplied with an E8a debugger. This product is able to power the Renesas Starter Kit board with up to
300mA. When the Renesas Starter Kit is connected to another system then that system should supply power to the Renesas Starter Kit.
All Renesas Starter Kit boards have an optional centre positive supply connector using a 2.1mm barrel power jack.
Warning
The Renesas Starter Kit is neither under nor over voltage protected. Use a centre positive supply for this board.
3.2. Power – Up Behaviour
When the Renesas Starter Kit is purchased the Renesas Starter Kit board has the ‘Release’ or stand alone code from the example tutorial
code pre-programmed into the Renesas microcontroller. On powering up the board the user LEDs will start to flash. After 200 flashes, or
after pressing a switch the LEDs will flash at a rate controlled by the potentiometer.
3