ATEVK1104S Atmel, ATEVK1104S Datasheet - Page 23

• Manufacturer Part Number: ATEVK1104S
• Description: KIT EVAL FOR AT32UC
• Manufacturer: Atmel
• Series: AVR®32 UC3r
• Type: MCUr

Specifications of ATEVK1104S

• Contents: Board, Cables
• Tool Type: Development Kit
• Cpu Core: AVR 32
• Data Bus Width: 32 bit
• Processor Series: AT32
• Processor To Be Evaluated: AT32UC3A3256S
• Interface Type: USB, JTAG, SD Card, Nexus, MMC
• Core Architecture: AVR
• Operating Supply Voltage: 5.5 V
• For Use With/related Products: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4.4
4.4.1
4.4.2
4.4.3
4.4.4
32072C–AVR32–2010/03
I/O Line Considerations
JTAG Pins
RESET_N Pin
TWI Pins
GPIO Pins
TMS and TDI pins have pull-up resistors. TDO pin is an output, driven at up to VDDIO, and has
no pull-up resistor.
The RESET_N pin is a schmitt input and integrates a permanent pull-up resistor to VDDIO. As
the product integrates a power-on reset cell, the RESET_N pin can be left unconnected in case
no reset from the system needs to be applied to the product.
When these pins are used for TWI, the pins are open-drain outputs with slew-rate limitation and
inputs with inputs with spike filtering. When used as GPIO pins or used for other peripherals, the
pins have the same characteristics as other GPIO pins.
All the I/O lines integrate a programmable pull-up resistor. Programming of this pull-up resistor is
performed independently for each I/O line through the I/O Controller. After reset, I/O lines default
as inputs with pull-up resistors disabled, except when indicated otherwise in the column “Reset
State” of the I/O Controller multiplexing tables.
AT32UC3A3/A4
23