101-0399 Rabbit Semiconductor, 101-0399 Datasheet - Page 24

• Manufacturer Part Number: 101-0399
• Description: KIT DEV RABBIT RCM2000 INT'L
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Moduler

Specifications of 101-0399

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 101-399; 101-399

•
•
•
20
LCD_DEMO.C
troller or an equivalent.
Connect the LCD to the RCM2000 address and data lines on the Prototyping Board.
SWTEST.C
DS2 and DS3 on the Prototyping Board on and off.
Parallel Port A bit 0 = LED DS2
Parallel Port A bit 1 = LED DS3
Parallel Port B bit 2 = switch S2
Parallel Port B bit 3 = switch S3
TOGGLELED.C
the press-and-release method of debouncing. As soon as the sample program starts run-
ning, LED DS3 on the Prototyping Board (which is controlled by PA1) starts flashing
once per second. Press switch S2 on the Prototyping Board (which is connected to PB2)
to toggle LED DS2 on the Prototyping Board (which is controlled by PA0). The push-
button switch is debounced by the software.
D0—DB0
D1—DB1
D2—DB2
D3—DB3
D4—DB4
D5—DB5
D6—DB6
D7—DB7
A0—RS (Register Select: 0 = command, 1 = data)
A1—R/W (0=write, 1=read)
*—E (normally low: latches on high-to-low transition)
—demonstrates the use of pushbutton switches S2 and S3 to toggle LEDs
—demonstrates a simple setup for an LCD that uses the HD44780 con-
—demonstrates the use of costatements to detect switch presses using
RabbitCore RCM2000