101-0399 Rabbit Semiconductor, 101-0399 Datasheet - Page 35

• Manufacturer Part Number: 101-0399
• Description: KIT DEV RABBIT RCM2000 INT'L
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Moduler

Specifications of 101-0399

• Contents: RabbitCore Module, Dev. Board, AC Adapter, Cable and Dynamic C® CD-Rom
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 101-399; 101-399

4.4.2 Standalone Operation of the RCM2000
The RCM2000 must be programmed via the RCM2000 Prototyping Board or via a similar
arrangement on a customer-supplied board. Once the RCM2000 has been programmed
successfully, remove the programming cable from the programming connector and reset
the RCM2000. The RCM2000 may be reset by cycling the power off/on or by pressing the
RESET
from the Prototyping Board for end-use installation.
User’s Manual
CAUTION: Power to the Prototyping Board or other boards should be disconnected
button on the Prototyping Board. The RCM2000 module may now be removed
when removing or installing your RCM2000 module to protect against inadvertent
shorts across the pins or damage to the RCM2000 if the pins are not plugged in
correctly. Do not reapply power until you have verified that the RCM2000 module is
plugged in correctly.
31