101-0577 Rabbit Semiconductor, 101-0577 Datasheet - Page 65

• Manufacturer Part Number: 101-0577
• Description: KIT DEV FOR BL2500 COYOTE
• Manufacturer: Rabbit Semiconductor
• Series: Coyoter
• Type: Single Board Computers (SBC)r

Specifications of 101-0577

• Contents: SBC, Dev. Board, AC Adapter, Cable and Dynamic C® CD-ROM
• Product: Modules
• Data Bus Width: 10 bit
• Processor Type: Rabbit 3000
• Sram: 128 KB
• Flash: 256 KB
• Number Of I/os: 24
• Backup Battery: 3 V Lithium Coin Type
• Operating Voltage: 8 V to 40 V
• Power Consumption: 1 W
• Board Size: 100 mm x 100 mm x 29 mm
• Description/function: Computer Module
• Interface Type: Ethernet
• For Use With/related Products: BL2510
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.1 TCP/IP Connections
Before proceeding you will need to have the following items.
• If you don’t have an Ethernet connection, you will need to install a 10Base-T Ethernet
• Two RJ-45 straight-through Ethernet cables and a hub, or an RJ-45 crossover Ethernet
The Ethernet cables and Ethernet hub are available from Rabbit in a TCP/IP tool kit. More
information is available at www.rabbit.com.
1. Connect the AC adapter and the programming cable as shown in Chapter 2, “Getting
2. Ethernet Connections
• If you do not have access to an Ethernet network, use a crossover Ethernet cable to con-
• If you have an Ethernet connection, use a straight-through Ethernet cable to establish
User’s Manual
card (available from your favorite computer supplier) in your PC.
cable.
Started.”
nect the Coyote to a PC that at least has a 10Base-T Ethernet card.
an Ethernet connection to the Coyote from an Ethernet hub. These connections are
shown in Figure 20.
Chapter 5 discusses using the TCP/IP features on the Coyote
boards.
User’s PC
(network of 2 computers)
Ethernet
crossover
cable
Direct Connection
5. U
Figure 20. Ethernet Connections
Coyote
SING THE
Board
Ethernet
cables
Direct Connection Using a Hub
Hub
TCP/IP F
Coyote
Board
EATURES
To additional
network
elements
59