DV164120 Microchip Technology, DV164120 Datasheet - Page 18

• Manufacturer Part Number: DV164120
• Description: KIT STARTER PICKIT 2
• Manufacturer: Microchip Technology
• Series: PICkit™ 2r
• Type: Microcontrollerr

Specifications of DV164120

• Contents: Board, PICkit™ 2 Programmer, Cable, CD
• Processor To Be Evaluated: PIC family
• Data Bus Width: 8 bit, 16 bit, 32 bit
• Core Architecture: PIC
• Ic Product Type: Programmer
• Kit Contents: Hardware, Cables, Literature And Software
• Ic Interface Type: USB
• Supported Families: PICmicro
• Rohs Compliant: Yes
• Development Tool Type: Hardware / Software - Starter Kit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PIC Micro® MCU
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: 8/14/20-pin PICmicros
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

DS51553E-page 14
1.4.7
The Source bar displays the source of the currently loaded device data. If read from a
hex file, it will display the hex file name. If read from a device, it will display the part
name. None (Empty/Erased) indicates the buffers are empty, and it will display
Edited once Program Memory or Data EEPROM Memory has been edited in the
window.
1.4.8
Program code can be loaded into the PICkit 2 Programmer application by selecting
File>Import HEX to import a hex file or by clicking Read to read the device memory.
The origin of the code is displayed in the Source block. The Program Memory window
displays the program code in hexadecimal. The code may be edited in the window.
The checkbox next to the Program Memory window is only available on devices with
EEPROM data memory. If the box is checked, then Program Memory, User IDs, and
Configuration Words are written to, read from, and verified on the device. If the box is
unchecked, then Program Memory, User IDs, and Configuration Words will not be
erased or altered during a Write Device operation, and will not be read or verified. The
checkbox does not affect Erase Device or Blank Check operations. Both memory
window checkboxes may not be cleared at the same time.
For supported serial EEPROM devices, the device contents are displayed in the Pro-
gram Memory window instead of the Data EEPROM Memory window for easier viewing
in the larger display area.
1.4.9
Similar to Program Memory above, data EEPROM code can be loaded into the PICkit 2
Programmer application by selecting File>Import HEX to import a hex file or by clicking
Read to read the device memory. The origin of the code is displayed in the Source
block. The Data EEPROM Memory window displays the program code in hexadecimal.
The code may be edited in the window.
The check box next to the EEPROM Data window controls whether the EEPROM Data
memory is written, read and verified. If the box is checked, then the device EEPROM
will be overwritten with the window data. If the box is not checked, then the device
EEPROM will not be erased or altered during a Write Device operation. The checkbox
does not affect Erase Device or Blank Check operations. Both memory window
checkboxes may not be cleared at the same time.
Memory Source
Program Memory
Data EEPROM Memory
© 2008 Microchip Technology Inc.