DV164120 Microchip Technology, DV164120 Datasheet - Page 23

• Manufacturer Part Number: DV164120
• Description: KIT STARTER PICKIT 2
• Manufacturer: Microchip Technology
• Series: PICkit™ 2r
• Type: Microcontrollerr

Specifications of DV164120

• Contents: Board, PICkit™ 2 Programmer, Cable, CD
• Processor To Be Evaluated: PIC family
• Data Bus Width: 8 bit, 16 bit, 32 bit
• Core Architecture: PIC
• Ic Product Type: Programmer
• Kit Contents: Hardware, Cables, Literature And Software
• Ic Interface Type: USB
• Supported Families: PICmicro
• Rohs Compliant: Yes
• Development Tool Type: Hardware / Software - Starter Kit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PIC Micro® MCU
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: 8/14/20-pin PICmicros
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

2.6
© 2008 Microchip Technology Inc.
IMPORTING A HEX FILE
FIGURE 2-6:
To avoid heavy current load errors, it is recommended to keep the target current
consumption below 25 mA. Large V
slow down the V
2.5.2
The target device may also be powered externally. By default, the PICkit 2 will automat-
ically detect an externally powered board. The heading “V
to “V
the detected V
Clicking the “Check” checkbox will update the detected V
voltage box. If no V
will return to supplying V
FIGURE 2-7:
To import a compiled program (hex file) to be programmed into the target device, select
File>Import HEX as shown in Figure 2-8.
FIGURE 2-8:
Example source code and hex files may be found under the Install\Lessons\
directory for the appropriate kit demo board on the PICkit 2 Starter Kit CD-ROM. The
hex file Reversible.hex from the folder 07 Reversible will be used.
Note:
DD
Target”, the “On” checkbox will be replaced by a checkbox named “Check”, and
Target Powered from External Supply
The maximum external V
The minimum external V
DD
DD
voltage is displayed in the grayed out voltage box as in Figure 2-7.
DD
risetime. The allowed V
V
EXTERNALLY POWERED TARGET
IMPORT HEX FILE
DD
voltage is detected when the checkbox is clicked, then PICkit 2
DD
ERROR
power to the target device.
DD
DD
DD
that may be used with the PICkit 2 is 2.5 Volts.
that may be used with the PICkit 2 is 5.0 Volts.
capacitances should also be avoided as they
DD
rise time is 500 μs or less.
DD
DD
voltage displayed in the
PICkit 2” will be changed
DS51553E-page 19