DV164121 Microchip Technology, DV164121 Datasheet - Page 72

• Manufacturer Part Number: DV164121
• Description: KIT PICKIT 2 DEBUG EXPRESS
• Manufacturer: Microchip Technology
• Series: PICkit™ 2r
• Type: Microcontrollerr

Specifications of DV164121

• Contents: Board, PICkit™ 2 Programmer, Cable, CD
• Processor To Be Evaluated: PIC family
• Data Bus Width: 8 bit, 16 bit, 32 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: PIC Micro® MCU
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PICkit™ 2 User’s Guide
No transmitted characters will be displayed if the “Echo On” checkbox is unchecked.
Check this box to display transmitted characters along with received characters in the
terminal display.
The “String Macros” at the bottom of the display allow up to four strings of characters
to be entered. Each string can be up to 60 characters long. When Send next to a string
is clicked, the entire string will be transmitted in sequence out of the PICkit 2. The
“String Macros” strings are saved even when the UART Tool is not in use.
When checked, the “Append CR+LF” checkbox above the string macro boxes will auto-
matically transmit the carriage return (0x0D) and line feed (0x0A) characters at the end
of a string when Send is clicked. When unchecked, nothing is transmitted after the
string characters.
Text in the terminal display may be selected (highlighted) with the cursor and copied
into the clipboard by right clicking and selecting Copy or pressing <Ctrl> + <c>.
7.3.3
Hex Mode
The UART Tool Hex mode displays the hex values of bytes received from the target’s
UART in the terminal display.
A line of bytes received by the UART Tool is preceded with the text “RX:”.
A line of bytes transmitted by the UART Tool is preceded with the text “TX:”.
In Figure 7-5, the four hex bytes 0x50, 0x4B, 0x53, and 0x41 were received from the
target (0x50 was received first). The three bytes 0x70, 0x6B, and 0x32 were then
transmitted, 0x70 first.
In Hex mode, bytes may only be transmitted one way: by typing a sequence of one or
more hex values in one of the four “Send Hex Sequences:” boxes. To send a sequence,
click Send next to it. A hex sequence may contain from 1 to 48 bytes.
The “Echo On” checkbox has no function in Hex mode.
Data in the terminal display may be selected (highlighted) with the cursor and copied
into the clipboard by right clicking and selecting Copy or pressing <Ctrl> + <c>.
© 2008 Microchip Technology Inc.
DS51553E-page 68