ATAVRONEKIT Atmel, ATAVRONEKIT Datasheet - Page 34

• Manufacturer Part Number: ATAVRONEKIT
• Description: KIT AVR/AVR32 DEBUGGER/PROGRMMR
• Manufacturer: Atmel
• Series: AVR®r
• Type: Debuggerr

Specifications of ATAVRONEKIT

• Contents: Programmer/Debugger
• Processor To Be Evaluated: AVR32
• Data Bus Width: 32 bit
• Interface Type: ISP, JTAG
• Core Architecture: AVR
• Kit Contents: ATAVRONEKIT
• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Development Tool Type: Hardware / Software - Dev Kit (Dev Tool)
• Rohs Compliant: Yes
• Mcu Supported Families: AVR32 32-bit MCU
• For Use With/related Products: AVR® Devices
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.2.3
AVR ONE! Quick-start Guide
Target MCU Chip erase
If the EVK1100 evaluation board is brand new, or if it still contains the original demo application (Control
Panel Demo), the FLASH lock-bits need to be cleared. Right-click on the AVR ONE! In the AVR32 Tar-
get view and select Chip Erase.
WARNING! This process will erase the original demo application programmed at the factory. After this
operation the EVK1100 evaluation board will be completely empty. If you need to keep the original appli-
cation, you should not perform this operation.
If you would like to use your EVK1100 for this example, it is not difficult to restore the original “Control
Panel Demo application”. All you have to do is to build the “Control Panel Demo example” enclosed with
AVR32 Studio.
You should now perform the Chip Erase operation.
Figure 6-11. Chip erase operation
Create demo application
32103C–AVR ONE!–02/10
6-7