ATAVRONEKIT Atmel, ATAVRONEKIT Datasheet - Page 8

• Manufacturer Part Number: ATAVRONEKIT
• Description: KIT AVR/AVR32 DEBUGGER/PROGRMMR
• Manufacturer: Atmel
• Series: AVR®r
• Type: Debuggerr

Specifications of ATAVRONEKIT

• Contents: Programmer/Debugger
• Processor To Be Evaluated: AVR32
• Data Bus Width: 32 bit
• Interface Type: ISP, JTAG
• Core Architecture: AVR
• Kit Contents: ATAVRONEKIT
• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Development Tool Type: Hardware / Software - Dev Kit (Dev Tool)
• Rohs Compliant: Yes
• Mcu Supported Families: AVR32 32-bit MCU
• For Use With/related Products: AVR® Devices
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

AVR ONE! Quick-start Guide
Unpack the Mictor38 connector and remove the pick-and-place pad
Figure 3-2.
Place the connector onto the footprint on the evaluation board. Make sure that the guide tab beneath the
connector fits into the guide hole in the PCB.
Add a fair amount of flux. The extra flux is very important for a good result. It is also very important to
keep the tip of the soldering iron clean while mounting the connector.
Too thick solder, too little flux or solder-blobs on the tip of the soldering iron will give bad connections or
short circuits.
Figure 3-3.
Remove the pick-and-place pad
Place Mictor38 and apply flux
Hardware preparation
32103C–AVR ONE!–02/10
3-2