HS7144KCI01H Renesas Electronics America, HS7144KCI01H Datasheet - Page 187

• Manufacturer Part Number: HS7144KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS7144KCI01H

• Contents: E10A-LITE, Cable and CD-ROM
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7144
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

6.5.5
In the SH7144F E10A emulator, the following functions using the AUD function can be used.
These functions are operational when the AUD pin is connected to the emulator
Table 6.7
Function
Branch trace function
RAM monitor function
Notes: 1. When HS7144KCM01H and HS7144KCI01H are used, the AUD function cannot be
2. When the MCU operating mode is MCU expansion mode 2, the AUD function cannot
3.
AUD Functions
<Setting example in using SH7144F>
Enable the AUD input/output pin multiplexed in port D and the CK pin multiplexed in
port A.
used.
be used.
Set the following before using the AUD function in the user program. The AUD
function does not operate correctly until the following is set after user program
execution is started:
AUD Functions
Set 1 to the AUDSRST bit in the SYSCR register and cancel the AUD reset.
Set the pin function controller to enable the AUD input/output pins (/AUDSYNC,
Set 1 to the PD15MD1, PD14MD1, PD13MD1, PD12MD1, PD11MD1, PD10MD1,
Set 0 and 1 to the PA15MD1 and PA15MD0 bits in the PACRL1 register,
AUDCK, AUDMD, /AUDRST, AUDATA3, AUDATA2, AUDATA1, and
AUDATA0) and the CK pin.
PD9MD1, and PD8MD1 bits in the PDCRL2 register, and 0 to the PD15MD0,
PD14MD0, PD13MD0, PD12MD0, PD11MD0, PD10MD0, PD9MD0, and
PD8MD0 bits in the PDCRL1 register to select the following pins: /AUDSYNC
input/output, AUDCK input/output, AUDMD input, /AUDRST input, AUDATA3
input/output, AUDATA2 input/output, AUDATA1 input/output, and AUDATA0
input/output.
respectively, to select the CK output.
Description
destination.
Enables realtime memory reading or writing during user
program execution.
Displays the addresses and instruction words at the branch
165