HS7144KCI01H Renesas Electronics America, HS7144KCI01H Datasheet - Page 43

• Manufacturer Part Number: HS7144KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS7144KCI01H

• Contents: E10A-LITE, Cable and CD-ROM
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7144
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

4.
2.5.2 Writing SHxxxx E10A Flash memory Mode
In this mode the emulator is used as a flash memory writer. The following procedures apply when
[Writing SHxxxx E10A Flash memory] is selected from the activation modes listed in the [Select
Session] dialog box.
1. The HDI window is displayed, and the dialog box is displayed as shown in figure 2.19.
If the driver is not correctly connected, the following dialog box will be displayed.
The [E10A Driver Details] dialog box is displayed when the [OK] button is clicked.
Select the correct driver. For details, refer to section 6.5.1, Emulator Driver
Selection.
Figure 2.18 [Unable to restore the previous driver settings] Dialog Box
Figure 2.19 Dialog Box of the RESET Signal Input Request Message
Figure 2.17 [INVALID ASERAM FIRMWARE!] Dialog Box
21