HS7144KCI01H Renesas Electronics America, HS7144KCI01H Datasheet - Page 188

• Manufacturer Part Number: HS7144KCI01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS7144KCI01H

• Contents: E10A-LITE, Cable and CD-ROM
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7144
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

(1) Branch Trace Function
When a branch occurs during user program execution, the branch destination address is acquired.
When the next branch occurs while the trace information is being output, the information is
stopped and the next trace information is output. The user program can be executed in realtime,
but some trace information will not be output.
Note: After [Trace stop] is selected in [AUD mode] of the [Trace mode] page in the [Trace
(2) Realtime Memory Access Function
Realtime memory reading or writing is enabled during user program execution. The specified
memory address contents (maximum three) can be displayed on the status bar. The memory
contents can be changed by the command line, and can be referenced in the [Memory] window.
Memory can be read or written as follows:
1. When the [Memory] window is used:
2. When the command line is used:
Note: Note that the flash memory area cannot be written by the RAM_W command.
166
Memory can be read or written during user program execution. Open the address to be
referenced in the [Memory] window. At reference, select Refresh from the [Memory] menu or
issue the Refresh command in the command-line window.
MEMORY_EDIT command: Memory can be read or written during user program execution.
RAM_R command: Address and size displayed on the status bar are specified during user
program execution.
RAM_W command: Memory can be changed during user program execution. One command
can change a maximum of three addresses.
Acquisition] dialog box and the trace buffer of the emulator becomes full, the trace
information is not acquired. The user program is continuously executed.