M30290T2-CPE Renesas Electronics America, M30290T2-CPE Datasheet - Page 37

• Manufacturer Part Number: M30290T2-CPE
• Description: EMULATOR COMPACT M16C/26A/28/29
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30290T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/Tiny
• For Use With: M30290T2-CPE-HP - EMULATOR COMPACT FOR M16C/TINY
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

M30290T2-CPE User’s Manual
2.9 Changing Settings
2.9.1 MCU Power Supply Source Selection Jumper/MCU Power Supply Voltage Selection Jumper
These are the jumper switches to select power supply to the MCU and its power voltage. As shown in Table 2.5 below, set the
switch according to the connection to the user system.
Table 2.5 Setting jumper switches
REJ10J0494-0200 Rev.2.00 July 16, 2005
Note on Setting Jumper Switches:
the user system
Not connected
Connection to
Connected
Always shut OFF the emulator before changing the setting of the jumper switches, and connecting the cable.
Otherwise the internal circuit may cause a break.
MCU power supply
source selection
jumper (JP1)
EXT
INT
MCU power supply
voltage selection
jumper (JP2)
Invalid
3.3 V
5.0 V
CAUTION
Supplied from the emulator. The MCU operating
voltage is 3.3 V.
Supplied from the emulator. The MCU operating
voltage is 5.0 V.
Supplied from the user system. This emulator
consumes max. 500 mA of electrical current from
the user system.
Description
Page 35 of 86
2. Setup