M34509T2-CPE Renesas Electronics America, M34509T2-CPE Datasheet - Page 10

• Manufacturer Part Number: M34509T2-CPE
• Description: DEV TOOL COMPACT EMULATOR: 4508/
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M34509T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: 4508, 4509
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M34509T2-CPE User’s Manual
REJ10J0543-0200 Rev.2.00 Sep. 25, 2006
Notes on Connecting the Power Supply of the Emulator:
Cautions to Be Taken for Turning On the Power:
Cautions to Be Taken for Handling This Product:
Caution to Be Taken for System Malfunctions:
Do not use any power cable other than the one that is included with the product.
The power cable included with the product has its positive and negative poles color-coded by red and black, respectively.
Pay attention to the polarities of the power supply. If its positive and negative poles are connected in reverse, the internal
circuit may be broken.
Do not apply any voltages exceeding the product’s rated power supply voltage (5.0 V ±5%). Extreme voltages may cause a
burn due to abnormal heat or cause the internal circuit to break down.
Turn ON/OFF the power of the emulator and user system as simultaneously as possible.
Do not leave either the emulator or user system powered on, because of leakage current the internal circuits may be damaged.
When turning on the power again after shutting off the power, wait about 10 seconds.
Use caution when handling the main unit. Be careful not to apply a mechanical shock.
Do not touch the connector pins of the emulator main unit and the target MCU connector pins directly. Static electricity may
damage the internal circuits.
Do not pull this emulator by the communications interface cable or the flexible cable for connecting the user system. And,
excessive flexing or force may break conductors.
If the emulator malfunctions because of interference like external noise, do the following to remedy the trouble.
(1) Press the RESET button on the emulator upper panel.
(2) If normal operation is not restored after step (1), shut OFF the emulator once and then reactivate it.
CAUTION
Precautions for Safety
Page 8 of 72