M34509T2-CPE Renesas Electronics America, M34509T2-CPE Datasheet - Page 26

• Manufacturer Part Number: M34509T2-CPE
• Description: DEV TOOL COMPACT EMULATOR: 4508/
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M34509T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: 4508, 4509
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M34509T2-CPE User’s Manual
2.5 Turning ON the Power
2.5.1 MCU Power Supply Voltage Selection Switch
Set the MCU power supply source selection switch of the emulator according to conditions of use.
Figure 2.5 Jumper switch locations of the emulator
These are the jumper switches to select power supply to the MCU and its power voltage. As shown in Table 2.2 below, set the
switch according to the connection to the user system.
Table 2.2 Setting jumper switches
REJ10J0543-0200 Rev.2.00 Sep. 25, 2006
Note on Jumper Switch Settings:
MCU power supply voltage selection switch (SW1)
Always shut OFF the emulator before changing the setting of the jumper switches, and connecting the cable.
Otherwise the internal circuit may cause a break.
3V
5V
CAUTION
Supplied from the emulator. The MCU operating voltage is 3.0 V.
Supplied from the emulator. The MCU operating voltage is 5.0 V.
Description
MCU power supply voltage
selection switch
Page 24 of 72
2. Setup