HS7144KCI02H Renesas Electronics America, HS7144KCI02H Datasheet - Page 182

• Manufacturer Part Number: HS7144KCI02H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS7144KCI02H

• Contents: E10A-LITE, Cable and CD-ROM
• For Use With/related Products: SH7144
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Note: Do not break the user program when the RES, BREQ, and WAIT pins are being low. A
160
RESET Signal (/RES)
The RESET signal can be accepted during user program break, when the peripheral modules
are reset. Since the PC, SR, and SP registers are not initialized, reset them and execute the GO
command when the user program is executed from the reset vector.
Data Transfer Controller (DTC)
The DTC operates even in the command wait state. When a data transfer request is generated,
the DTC executes a DMA transfer.
Interrupt
All interrupts except for NMI are masked during user program break.
TIMEOUT error will occur. The TIMEOUT error will also occur at memory access when
the BREQ and WAIT pins are fixed low during break.