HS7144KCI02H Renesas Electronics America, HS7144KCI02H Datasheet - Page 40

• Manufacturer Part Number: HS7144KCI02H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS7144KCI02H

• Contents: E10A-LITE, Cable and CD-ROM
• For Use With/related Products: SH7144
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

7. Supply power to the user system.
2.5.1 SHxxxx E10A Emulator Mode
This mode is used for debugging in the emulator.
1. The HDI window is displayed, and the dialog box is displayed as shown in figure 2.9.
2. After the [System Clock] window appears, input the system clock frequency. This frequency
3. Set an eight-digit hexadecimal ID code as a security code for the flash memory. However,
18
The subsequent procedures depend on the activation mode that was selected in step 5.
value is used when writing and erasing flash memory in the emulator.
FFFFFFFF cannot be set as the ID code.
Input the ID code when [SHxxxx E10A Emulator] is selected and the [New registration] check
box is unselected on activating the HDI. If the ID code is not matched, the flash memory
contents are erased.
Figure 2.9 Dialog Box of the RESET Signal Input Request Message
Figure 2.10 [System Clock] Dialog Box