HS38000EPI61H Renesas Electronics America, HS38000EPI61H Datasheet - Page 28

• Manufacturer Part Number: HS38000EPI61H
• Description: DEV EMULATOR BASE UNIT H8/38000
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of HS38000EPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: 38000 Series
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.3.1
• Ensure that all power is off to the emulator and the user system.
• Insert the cable head into the socket on the user system.
Note: Depending upon the package, it may be possible to orientate this cable head in any position on the socket,
• Screw the cable head to the socket with the screws provided. Progressively tighten the screws in the sequence
Note: Be careful not to over-tighten the screws as this may result in contact failure on the user system or
shown in figure 2.5 until all are ‘finger tight’.
so care should be taken to correctly identify pin 1 on the emulator and socket when installing.
damage the cable head. Where provided, use the ‘solder lugs’ on the QFP socket to provide extra
strength to the emulator/user system connection.
Example of Connecting the User System Interface Cable Head to the User System
Figure 2.4 Example of Connecting User System Interface Cable Head to User System
Figure 2.5 Sequence of Screw Tightening
IC socket
Screw (
×
1
4
4)
3
2
User system interface
cable head
7