HS3664EPI62H Renesas Electronics America, HS3664EPI62H Datasheet - Page 264

• Manufacturer Part Number: HS3664EPI62H
• Description: EMULATOR BASE UNIT H8/3664
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS3664EPI62H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: H8/3664
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

D.2
The CD-R includes a test program for this emulator (HS3664EPI62H) and that for the previous version of the
emulator (HS3664EPI61H) that does not incorporate the USB interface. Usually refer to the descriptions for the
HS3664EPI62H below.
Insert the CD-R (HS3664EPI62SR supplied with the emulator) into the CD-ROM drive of the host computer and
move the current directory to either of those listed below with a command prompt.
When HS3664EPI61H is in use: <Drive>: \Diag\HS3664EPI61H
When HS3664EPI62H is in use: <Drive>: \Diag\HS3664EPI62H
Then enter one of the following commands according to the PC interface board in use to initiate the test
program:
1.
2.
3.
4.
Note: When HS3664EPI61H is in use, the test program is not supported for the LAN or USB adapter.
The High-performance Embedded Workshop must be installed before the test program is executed.
Be sure to initiate the test program from <Drive>:\Diag\HS3664EPI62H. Do not initiate it from a directory other
than <Drive>:\Diag\HS3664EPI62H, such as > <Drive>:\Diag\HS3664EPI62H\TM3664_62 –PCI (RET). If the
test program is initiated when the current directory is not <Drive>:\Diag\HS3664EPI62H, the test program will
not operate correctly.
When –S is added to the command line such as >TM3664_62 –PCI –S (RET), steps 1 to 20 will be repeatedly
executed. To stop the execution, enter Q.
Notes: 1. <Drive> is a drive name for the CD-ROM drive.
242
PCI bus interface board (HS6000EIC01H or HS6000EIC02H)
When HS3664EPI61H is in use: > TM3664 –PCI (RET)
When HS3664EPI62H is in use: > TM3664_62 –PCI (RET)
PCMCIA interface card (HS6000EIP01H)
When HS3664EPI61H is in use: > TM3664 –PCCD (RET)
When HS3664EPI62H is in use: > TM3664_62 –PCCD (RET)
LAN adapter (HS6000ELN01H)
When HS3664EPI62H is in use: > TM3664_62 –ELN (RET)
USB adapter (when using the USB interface in the emulator)
When HS3664EPI62H is in use: > TM3664_62 –USB (RET)
2. Do not remove the CD-R from the CD-ROM drive during test program execution.
Diagnostic Test Procedure Using Test Program