PMF18WE1 Microchip Technology, PMF18WE1 Datasheet - Page 18

• Manufacturer Part Number: PMF18WE1
• Description: PROCESSOR MODULE FOR ICE4000
• Manufacturer: Microchip Technology

Specifications of PMF18WE1

• Module/board Type: Processor Module
• Product: Microcontroller Modules
• Core Processor: PIC18F6585/6680/8585/8680
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: ICE4000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant

MPLAB
2.6
2.7
DS51490A-page 12
APPLYING POWER TO THE SYSTEM COMPONENTS
APPLYING POWER TO THE SYSTEM COMPONENTS – LOW VOLTAGE
EMULATION
ICE 4000 User’s Guide
To prevent damage to any of the subsystem or target application parts, power up the
system components as specified below.
See Section 2.7 “Applying Power to the System Components – Low Voltage
Emulation” before using low voltage emulation if this feature is desired.
1. Apply power to the PC.
2. Apply power to the emulator pod.
3. Apply power to the target application circuit.
MPLAB ICE 4000 supports low voltage emulation (2.5V). In this configuration, power
MUST BE SUPPLIED by the target system.
To prevent damage to any of the subsystem or target application parts, power up the
system components as specified below.
1. Check the limitations for your selected device. Some devices allow emulator pins
2. Apply power to the PC.
3. Apply power to the emulator pod.
4. Apply power to the target application circuit.
Damage to the emulator system and/or target application may occur if these steps
are not followed.
Damage to the emulator system and/or target application may occur if these steps
are not followed.
Note: When power is supplied by the target system, MPLAB ICE 4000 loads the
Note: When power is supplied by the target system, MPLAB ICE 4000 loads the
to come up as output high, instead of input. Make certain you do not allow the
emulated device to do this if your application cannot tolerate 5V.
Insert the processor module BEFORE turning on the emulator pod. DO NOT
insert a processor module with power applied to the pod.
Insert the processor module BEFORE turning on the emulator pod. DO NOT
insert a processor module with power applied to the pod.
target system with up to 150 mA. An MPLAB ICE 4000 device adapter
loads the system with up to 10 mA.
target system with up to 150 mA. An MPLAB ICE 4000 device adapter
loads the system with up to 10 mA.
CAUTION
CAUTION
CAUTION
CAUTION
 2004 Microchip Technology Inc.